1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Manual Windshield Washer Pump Assy

Discussion in 'Early Jeep Restoration and Research' started by Rubicloak, Feb 11, 2020.

  1. Feb 11, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    For those of you like myself that had not seen a complete NOS kit. Here you go. My 1971 has the bag holder (minus the long gone bag) on the driver inner fender, double squirt nozzle with the short hose hanging off it and the push pull assembly minus the pump. Because I had the knob but no pump (long since broken off), I had no idea what this contraption was supposed to look like.

    Thanks to all of the input from guys on this forum, I was able to source a NOS pump assembly in addition to a NOS complete kit!

    Below are the pics of the NOS kit I just received! The bag and all of the rubber pieces and hoses are still very pliable, like they were just produced!

    Thank you everyone who helped me identify and ultimately locate these very hard to find items.
    I apologize for the rotated pic. For some reason it is rotating when uploading here.

    20200210_194412.jpg

    20200210_194447.jpg

    84356589_2713357688718933_4447511679516803072_o.jpg

    20200210_194519.jpg

    20200210_194637.jpg
     
    Last edited: Feb 11, 2020
  2. Feb 11, 2020
    Beach66Bum

    Beach66Bum 1966 Tuxedo Park Mark IV 2024 Sponsor

    Big Island on...
    Joined:
    Oct 30, 2015
    Messages:
    1,597
    Very cool that you were able to find this complete NOS system! Like winning a small Lottery :)
     
  3. Feb 11, 2020
    Admiral Cray

    Admiral Cray I want to do this again.. Staff Member

    Bainbridge...
    Joined:
    Sep 21, 2009
    Messages:
    204,347
    Very cool... :clap:

    Didn't come with the hood nozzle?...
     
  4. Feb 11, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    Unfortunately no, he said that he must have misplaced it over the years. Thankfully my 71 already has the dual nozzle still in the cowl
     
  5. Feb 11, 2020
    mickeykelley

    mickeykelley Well-Known Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,900
    Gotta post a video when all installed and operational.
     
    Fireball and Rubicloak like this.
  6. Feb 13, 2020
    WYOMIKE

    WYOMIKE Oct 1971 pic

    Parkman, Wyoming
    Joined:
    Jan 22, 2003
    Messages:
    685
    Note of a little caution, if you have headers, because of the heat they give off, that plastic bag will not last long. Learned the hard way. :(
    Mike
     
    Rubicloak likes this.
  7. Feb 14, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    No headers, stock front dump manifold. But yes you're definitely right about the heat from headers destroying the bag and fast
     
    Last edited: Feb 17, 2020
  8. Feb 14, 2020
    Admiral Cray

    Admiral Cray I want to do this again.. Staff Member

    Bainbridge...
    Joined:
    Sep 21, 2009
    Messages:
    204,347
    Your not think of using it are you?...

    It's only NOS once... :schooled:
     
  9. Feb 14, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    Well, after I install it... It will no longer be NOS, but, the jeep will be complete ;) It doesn't do anyone any good sitting in a box on a shelf .

    Thankfully it will not be going into a pos. it is going to be in a frame off restoration and will be living it's true self (y)
     
  10. Feb 14, 2020
    BJHitson60

    BJHitson60 Member

    San Rafael, CA
    Joined:
    Nov 20, 2009
    Messages:
    214
    Very cool - they actually work pretty good.
     
  11. Feb 14, 2020
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    Glad to see you find a unicorn for a proper restoration.
    -Donny
     
    Rubicloak likes this.
  12. Mar 17, 2020
    SleepyJeeper

    SleepyJeeper New Member

    Michigan
    Joined:
    Mar 4, 2020
    Messages:
    4
    Is there two holes coming out of the back of the pump? Is there a part number on any of the stuff? I am very sorry if you took a picture of this, but for some reason when I click to enlarge the picture it gives me an error and all I can see are the thumbnails. Thank you in advance!
     
  13. Mar 18, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    There are two coming out the back. One side pulls from the bag and the other pushes out to the nozzles. I don't remember seeing a part number, however this was a universal part used by more than one car maker.
    This is what you want to be using as your search words on the net. TRICO WINDSHIELD WASHER DASH HAND PUMP NOS
    s-l500 (3).jpg
     
    Last edited: Mar 18, 2020
  14. Mar 18, 2020
    SleepyJeeper

    SleepyJeeper New Member

    Michigan
    Joined:
    Mar 4, 2020
    Messages:
    4
    Perfect! Thank you so much
     
  15. Oct 8, 2020
    jeepers1969

    jeepers1969 New Member

    Pueblo, Colorado
    Joined:
    Aug 31, 2007
    Messages:
    28
    Do you have the location info for mounting the nozzle on the cowl? I have all the parts to install the washer system but do not know how far from base of windshield (or front edge of cowl) to drill the hole. Only want to drill once!
     
  16. Oct 9, 2020
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,626
    If nobody else responds first, I can find time to measure my '71 tomorrow evening.
     
  17. Oct 10, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    Exactly 14.25" in the middle of cowl between the two inner hood hinge bolts. 2 13/16" back from front of cowl to middle of hole. Hole is 5/16". Will post pics tomorrow.
     
    Last edited: Oct 11, 2020
  18. Oct 11, 2020
    jeepers1969

    jeepers1969 New Member

    Pueblo, Colorado
    Joined:
    Aug 31, 2007
    Messages:
    28
    Thanks. That is a great help
     
  19. Oct 11, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
New Posts