1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Roll Bar placement

Discussion in 'Early CJ5 and CJ6 Tech' started by Sleek77, Feb 18, 2016.

  1. May 3, 2016
    mickeykelley

    mickeykelley Well-Known Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,900
    Is this the factory one or one you had made? I'd also like to see the outside of the fender where it looks to also be attached to the angle iron. As soon as I get back from vacation, this is the first June project.
     
  2. May 5, 2016
    noahlon

    noahlon Old Fart

    Pine Ridge, AR
    Joined:
    Dec 22, 2010
    Messages:
    206
    [​IMG]
    [​IMG]
    [​IMG]

    factory/dealer made. I replaced the fender wells with plate steel and reinforced the inside of well. The fire extinguisher is not mounted for road travel as this is not a daily driver
     
  3. May 5, 2016
    aekdbbop

    aekdbbop Member

    TN
    Joined:
    Jul 31, 2014
    Messages:
    403

    totally off topic.. what color is your jeep? did you paint it?
     
  4. May 5, 2016
    PierreDnepr

    PierreDnepr Member

    Barrie Ontario
    Joined:
    Sep 4, 2013
    Messages:
    218
    I just have two quick questions...

    1- Is the front hoop is straight up and not at an angle?
    2- Is maximum height of the front hoop matches the windshield height?

    I'll have to get one build and for my early CJ - I like this design best (my personal preference mind you)

    Thanks
     
  5. May 6, 2016
    noahlon

    noahlon Old Fart

    Pine Ridge, AR
    Joined:
    Dec 22, 2010
    Messages:
    206
    The paint was originally intended for the rebuild of a C-47, but problems dictated otherwise. The color is aircraft olive drab. No idea of the availability.
     
  6. May 6, 2016
    noahlon

    noahlon Old Fart

    Pine Ridge, AR
    Joined:
    Dec 22, 2010
    Messages:
    206
    [​IMG]
    [​IMG]
    The angle iron base is 24" long. the width from angle iron top edge to top edge is 54" it is 34 1/2" high from the top of the fender.
     
  7. May 7, 2016
    PierreDnepr

    PierreDnepr Member

    Barrie Ontario
    Joined:
    Sep 4, 2013
    Messages:
    218
    Thanks a million - that will help
     
New Posts