Single 1/4” Output Master Cylinder Fitting

Was doing a MC swap and noticed the part(s) I bought didn’t match exactly what I had (result of buying before disassembly). Was wondering if anyone knows where to buy this single line output for a 1/4” brake line?

I hulked out tightening the line and wrecked the threads

Thanks

 

I will look in my parts to see if I have one, I have some parts and pieces left over from my build, plus I am putting together the parts I need to go to Duel Master cylinder, so there is a chance I have one. I will get back with you if I find one. Good Luck

 

Known as a Banjo fitting.

 

I have a couple but they have 2 line connections. I wonder if Walcks or Kaiserwillys would have that?

 

The fitting I bought off walck’s was a Y fitting with two 3/16” output. I bought a plug anticipating using just one, but when I realized the line was 1/4” I had to audible and use the old one.
Saw walck’s has another Y fitting for trucks/wagons, one output 3/16”, the other 1/4”. May be plan B

 

Master Cylinder Outlet Fitting (

 

Try searching here: Banjo Union 7/16 Banjo Hole to 7/16 x 24NS Port

 

I looked in my stuff here, I have not found one, I don't want to go to Joes farm and look there yet. You should be able to find that banjo fitting at any real auto parts store, Jeeps and Tractors used same parts a lot of times. I always felt that Jeep said "Universal" because you need a new part, go to the auto part's store and get a "Universal" part and nothing changed. I never knew what "Universal" really meant, but every time I see that on a Jeep it takes me back to the old days, Factory part $10.00, Universal $5.00. Good Luck.

 

I called and talked to Carl and ordered one from Walck's, all they have is the banjo fitting with two holes and you plug one of them. This works great and has not leaked. Just rotate/position it to fit the brake line.

 

Thinking the truck/wagon option with 1/4” output will be my ticket and plug the 3/16” end. Thanks for confirming