1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

The Typhoon Build (Hopped Up F-Head)

Discussion in 'Builds and Fabricators Forum' started by Lifesgoodhere, Aug 22, 2009.

  1. Nov 26, 2021
    sterlclan

    sterlclan Member 2022 Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    3,869
    his pictures are still here he must be somewhere.....
     
  2. Nov 26, 2021
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,348
    Dyno slip in 2021…..
    lets go Dyno slip!!!!
     
    Dandy and Fireball like this.
  3. Aug 25, 2022
    GillaFunk

    GillaFunk I'm the Dude, so thats what you call me. 2023 Sponsor 2022 Sponsor

    Graeagle Calif...
    Joined:
    Sep 26, 2019
    Messages:
    278
    …….funny. Once I get my blown head gasket replaced, and my truck back from the dealer (where it’s been since June 1, 2022, I was thinking about taking my CJ to get tuned and on the Dyno.
     
    dozerjim and WTn800 like this.
  4. Sep 16, 2022
    Jw60

    Jw60 Sitting up n buckled down. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,716
    This is my favorite time of year.
    And the mystery of it all.
     
  5. Sep 27, 2022
    Jw60

    Jw60 Sitting up n buckled down. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,716
    it's hard to find a dyno that can even accurately measure 4cyl numbers. My college had one for electric trucks but I never got mine running well enough to book time.
     
    Last edited: Nov 13, 2022
  6. Sep 27, 2022
    CHUGALUG

    CHUGALUG Member

    Silverton, OR
    Joined:
    May 11, 2019
    Messages:
    238
    I have had my CJ-2A on a dyno while tuning the weber carb. Running it in 30% OD at the time the rear wheels were traveling 97mph when the engine hit 4300rpm It showed 46.23 HP at 3650 rpm.

    I have since learned that there are so many variables in a dyno test its near impossible to compare one to the other unless done by the same dyno on the same day by the same guy. Also that the 60HP the 134L is rated was done with no generator no water pump no fuel pump and straight pipes. SO comparing a chassis dyno to the factory rating is pretty hard to do.

    SO I have another way to bench mark my engine.

    My jeep will currently do the 1/4 mile in 23.6 sec at 55mph on a 66 degree day at 350ft above sea level. and it gets 17.3mpg at an average speed of 55mph I use an app called Drag Racer to come up with these numbers.
     
  7. Nov 13, 2022
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,348
    Getting to be that time of year!!!!! maybe a Dyno slip this year!!!!
     
    dozerjim, Dandy, Stakebed and 3 others like this.
  8. Nov 15, 2022
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,460
    Maybe but I doubt it will be from lifesnottoogoodhere.
     
  9. Nov 24, 2022
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,348
    Today is the day!!!!!
     
  10. Nov 24, 2022
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,460
    Typhoon build: seeding a hurricane with silver iodide-------
     
    givemethewillys likes this.
  11. Nov 23, 2023
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,348
    Will it be a Dyno slip in 2023?
    This is the year!!!!
     
  12. Nov 23, 2023
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,110
    OP hasn't been here since 2012....I wonder if he knows we're having a laugh at his expense?
     
    vtxtasy likes this.
  13. Nov 23, 2023
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,418
    I'd laugh if the jeep got sold as a pile of parts and someone on here actually has it and doesn't know:D
     
    vtxtasy likes this.
  14. Nov 23, 2023
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,348
    Should be a pile of dyno slips in it
     
    jeepstar, termin8ed, vtxtasy and 2 others like this.
New Posts