Transfer Case Mount V6

Well i posted a WTB ad in the classifieds with no results.
I'm looking for the metal piece that goes between the transfer case and the frame mount on a v6 jeep. Can someone post pics and dimensions so I can try to build one?

 

http://www.earlycj5.com/xf_cj5/index.php?threads/150666/#post-1705355

Need to know the material thickness and width.

I did a search "case mount" by fireball

 

He has 5 build threads thanks to the flatties

 

Yes.
I've been using the round 4 cylinder type mount but I thought it might be easier to use the v6 frame mount when I build/modify/cobble together a crossmember for the T18.

 

Since everyone is already referencing my pictures, I suppose I should chime in too.

Dimensions are 1 5/8" wide by 1/4" thick bar stock.

Here's some shots I took this morning:


Note the factory ones are angled slightly forward with the bend at an angle across the bar stock. See picture from below:


Not sure why they did that but probably to clear the rivets for the body mount. It's probably not needed for a custom fabbed bracket with the transfer case in a non-stock location.

 

Perfect! Just what I needed to see.
I SHOULD have one of those, my Jeep had that style of mount stock, but when my dad stole the trans for his Jeep & the transfer case sat in his garage for 20+ years, it seems to have disappeared.

 

I took this one off jeep in 94 when I put the TH350 in jeep
I've since have went back to a stick . someday I'll get off my butt and install it again
happy to send you a CAD ( cardboard ) sample of it
looks different than fireballs

 

Thanks! But I think I have the info I need to make one...

 

I built mine. It's all 3/16 thick. Basically used a piece of 2" angle bolted to the 4 cyl motor mount long enough to line up with a piece of flat bolted to the transfer case. Spotted it there, removed it and welded it together.

 

Does this help?

 

That's exactly what mine looks like.