Not even downhill with a tailwind.
Sorry, can't help with the steering shaft, outside my area of experience. :whistle:
OK so inverted flares both ends for the pressure hose, do a google search for 'ford power steering box fitting sizes" and for "GM power steering...
I think they had one of these on Pawnstars that changed hands for $75,000 or so.
What you have to do is identify what connectors are used at the pump & what are used at box. Gm used a couple of different ones over the years,...
Somewhere's I've seen a pic of the assembly line where one of the jeeps had the lowered wheelhouses, definitely for "troop" seats.
Yes the tach output is really just a connection to the switched side of the coil, no isolation at all.
A new one is probably cheaper.
A couple of the CJ's are appealing to me but it's a 2 day trip just to go look at them :(
On the next new pulley try the key in it before slipping it on the shaft, if the slot is too narrow (carefully!) use a file to widen it until the...
Yes it's brazed, or maybe soldered, either way definitely not screwed in. Hex head? Probably just a stock catalog fitting, I'm guessing a reverse...
So which is he better engine, the Windsor or the Cleveland?
You should be able to find the exact dimensions here-
These things are noted for the grease lubricating the input spindle hardening up enough to freeze it up and snapping the cable. Disassembly,...
Unless you're going for period correct(ish) you might want to also consider a disk brake swap, there's a number of options available & all things...
It's not going to fly @ 3hp on a 15A 120v circuit, 1 HP = ~ 6.2 Amps, 3 is over 18. I have a 2 HP saw that kept popping a 15A breaker under load,...
Where are you located at?
Separate names with a comma.