The factory had the vacuum advance hose hooked to ported vacuum at the carb. Later year V8s ran ported to the spark CTO switch. Ported vacuum came...
69 V6 T14 Warn OD Few guys inspecting my 1920 Ottawa [IMG]
71 V6 T14 Warn OD [IMG]
I used the Rust-Oleum kit about 12 years ago in my two bay garage and for the most part has held up just fine. Hot tires/water has caused some...
The cap would then have a two-way check valve.
Drag link needs to be adjusted, out of round steering wheel? Very nice looking Jeep!
I'm sure he is, and I hope my post didn't sound negative towards him that wasn't my intentions. It's business, if I had a beef it was with the...
Phil was a hair quicker on the draw and had a lot more cash flow then I was willing to pay. About 8 years ago I found a nice one owner Silver...
30k is for the possible buyer at 20k thinking they got a deal. I’m guessing he paid 6k - 8k for it.....if that.
Factory Service Manual
The fuel filter in the above photo is not positioned correctly to prevent vaporized fuel from entering the carb. The filter must be mounted...
1. Is there a return line to the tank? The diagram shows none, but the engine has one of those fuel filters that has a return line. It was plugged...
It was a nice night for a drive. The flag and the ocean backdrop caught my eye so I stopped for a photo. If I had time I would have moved the Jeep...
[ATTACH]
Feed is spot-on at 12 psi. Restricting the feed line doesn’t tell you much especially if you know your feed psi. I’m interested in hearing the...
I would check the return psi before restricting fuel pressure, return should be zero. If you find 2 psi or above you have a return restriction...
Is it still running rich or is the idle high, or both? If it’s just the idle and the IAC counts are good on the chip you can manually adjust the...
Thanks for sharing Tim.
I have a new 1 ton TR 1/4” wall with 7/8” TR end that fits a stock narrow track 30 knuckle I won’t be using. Next to a stock 30 TR [ATTACH]
[MEDIA]
Separate names with a comma.