I took the time to blow the dust off this thing today. I've been collecting some parts and doing a few little things that my ailments allow...
Get a Gmail style flat plug with the pigtail on it that plugs in to the one one column. And splice the existing wiring to it using the fsm schematic.
Man that got hot before it broke a connecting rod...
Wow....nice collection of jeeps...
Yes. It is extremely caustic do not dispose of in a unsafe way
We use this at work to clean plugged up egr and oil coolers on the big diesel motors. Works excellent.
Still no pictures...
Have one that needs rebuilt free for the taking . It should fit in a large flat rate box. Around 25 dollars.
Nice use of some wasted space and making a single purpose trailer into a dual use one.
I made a pump baffle/reservoir out of a tomato juice can cut the top off trimmed it to the depth I needed took a can opener and punched four holes...
Generator bearing is bad or the shive is loose on the shaft.
We had a bad batch of them at work recently o ring leaks ,seam on canister splitting open. The worst was the filter media disintegrated and...
Look in norcal69 build thread he has a link to some real nice ones. On the spendy side but excellent quality.
If the timing is correct I would be looking at that injector not delivering enough fuel or any at all .I ran into this problem on a 302 with a...
Well if tubing is priced in your area like it is here have them apply a liberal amount of lube before bending you over and inserting it.
I'm thinking that is part of the rope seal and should be replaced. i would if it was mine it is a fairly easy thing to do with the pan already...
A board member 73cj5 put one on his f head.
Nice work …
Yes it is . Good stuff .
Condensation is the culprit . Oil galley filled up with water from it.
Separate names with a comma.