Sounds accurate. IIRC, the action of bolting down the p.plate to the flywheel actually tweaks the fingers so they point down a bit (compared to...
What year jeep do you have? Not all frames have the serial number stamped on them.
Hope this may help; here's a pic of a serial number stamped on the front right frame rail, as if you had the hood up and were standing next to the...
How bad would it kink if you just ran it as is? On my rig, I had a slight kink (w/ plenty of filter rub) and never had a prob. Perhaps it helped...
:( looks like it's too late of a suggestion. Still, looks great. Glad to see you back among the living John! :)
Chris, is the fork new? If not, BTDT. Turned out to be that the fork became twisted. I too ruined 3 cables before discovering. Give it a good...
Hello bjames, welcome from NC. :) You asked if there is anything to know when pulling the T-90 & dana18 apart, and the answer is YES. The biggie...
No sweat Joe. There are a few tricks to get things unfrozen along the troubleshooting chain. Just let us know what you see when you get back and...
Is the tranny in gear or in neutral? Will the wheels move? Perhaps remove the tranny cover and see what you can see (rust, water, broken...
Great advice. I thought one my gaskets was failing too...turned out that gear oil was leaking out of the shifter and riding down the side. Sure...
Yeah!! What MOP said. :evil:
Welcome from NC. Congrats on the purchase! :) Are you getting good oil pressure?
I'd try a small smattering of thinners (acetone, mineral spirits, etc) and try some light rubbing in an inconspicuous area prior to any drastic...
[img] This was my setup for years & nary had a problem on or off highway. YMMV.
In some states you can do a VIN inquiry through the DMV/BMV. If you have a hunch which state (if any) it may have come from, perhaps start there....
Izzat the Echlin brand lynn? :)
Welcome J E from NC. Question: is your engine a 4-cyl, V6, or other?
(Aw man, this is killin' me... R)) Good luck on the buildup Phil! :beer: Can't wait to see pics.
Wow! Glad you made it back. So now what? Replace the pin w/ a grade 8?
Hi Tom, welcome to the fun forum here. :beer: I'll redo your heads/engine for $2400 any day of the week!! :) Just funning a bit as that's...
Separate names with a comma.