I'm considering re-working my mounts to have the fairlead just below the bumper. My thinking is to improve air flow to the radiator and...
I picked up this bandsaw a while back, and have had a chance to use it quite a bit. [img] [img] This one is from Northern Tool, but looks...
I've been picking away at this project for quite a while, taking some pics along the way. I'll try to get things up to where it currently is,...
After following the thread on the 20T press and seeing the SWAG press brake, I got an itch to make one for the 12 ton press I'm borrowing from my...
And how did it happen? Curious to know how common it is to break an original axle and what kind of use (abuse?) caused it.
I need to get a timing light and am looking for advise. I don't mind spending money on a good tool, but I'm not sure what I should be looking for....
I got the new motor installed on my winch, so it is functional now. I'm considering replacing the oil in the gearbox with Cornhead grease. It...
I'm working on installing a Ford T18 transmission behind my stock 225 v6. Replacing the T86 it was built with. The Ford input shaft is 1 1/16"...
I knew there was "something" going on with my winch motor, so today I had time to take it to my local auto electric guy. He called me back with...
I've been thinking about putting a four speed transmission in my rig sometime down the road and not sure which one I should be looking for. I plan...
After gleaning through the archives and some links, here's my version of a brake drum drilling jig. I'll give a brief description, hopefully the...
I needed to remove my brake drums from my hubs and didn't want to spend the buck$ on a swedge cutter, so I thought I'd try a holesaw like I'd...
I am replacing my single master cylinder with a dual and will need to re do my brake line connections. My question is which outlet on the master...
Separate names with a comma.