Maybe this has been previously discussed and I missed it. When comparing the knuckles that were originally on my 1955 3B with the ones off the...
I made a locking "cover" for the tee handle to slow someone down from releasing the clutch, spooling out the rope, and cutting it off. They will...
I didn't find these posted elsewhere. [img] [img] [img] [img] [img] [img] [img] [img]
Do all the early D44's with two piece axles use Timken 25821/25877 cup/cone? My Timken catalog didn't go earlier than 1970. Thanks
I had to move about 20 axles from my bone pile to get to my single wide tread FC 150 axle this afternoon. My FSM, 1960 edition, clearly shows a...
Forgive me if these were posted elsewhere but I didn't find a reference in a search. The flanges in this case are the 27 spline versions but...
I ordered one of these on-line from K-W a number of weeks back. [IMG] In the interest of full disclosure, the installation was in my Polaris 900...
Anyone have the actual dimensions on these? Centerline to centerline for the arms and width between arms. Thanks
All loaded up for a minimum 3 day stay in the backcountry. Un-answered is the stability of a 50" machine with 50 lbs worth of packs on that high...
In an effort to make this strap more readily available on the trail rather than digging through the trail gear duffel which is usually buried...
With my deep appolpgies for what this went on-------- That said, something similar would fit a lot of rear tire carriers no matter what model...
I bought an air hose reel probably 3 years back and in the interim, all it has been doing is occupying floor space. Finally got around to making...
I think we have all read about or studied stress risers with respect to failure. As I was gathering up scrap for a trip to the steel yard a few...
Spent yesterday afternoon installing this. Fit perfect. Only complication was getting the factory tin foil version (which also retains the tank)...
About a moth back I removed 6" of the right rear brake line: [img] I was under the assumption something flipped up there and bent it, causing...
Anyone else find there isn't enough room on the inside axles to get both snap rings in? Solution??????
Picked up my trail shoes for the JK this morning. My intent is to just use these for trail runs. Will keep the stockers on it the rest of the...
Well, I tried to search for these and it could be that some are buried in the build threads but didn't find any. I'm in the process of installing...
After kicking around the old "what to do?????" with the front axle under the 3B for a couple of weeks (sheared the end off of the right side shaft...
As I finally get into my flatty bucket list engine, and I know more that a few of you will probably think there are more than a few loose nuts and...
Separate names with a comma.