All parts from my 1971 V6 T14 with bellhousing (no rear gear) $200 Muffler and tail pipe (the SM420 is too long for this muffler) $25 Pretty new...
I am in the process of this swap. I have transmission and transfer case in. Novak kit. I ended up "frenching" the transmission mount into the...
Going to dig into an old speedometer this weekend. What grease specifically should be used? I figure red and sticky is out. I have seen mention...
I presently have a limited slip in the rear of my CJ5. I'd like to go full locker after I get my SM420 installed. I had a buddy that had a...
I know this is here somewhere but I can't find it. As I creep through Market Place I find CJ5s that are obviously not the correct year. I am...
I have been doing some research on this trying to determine if I want to twin stick my D18 when I do the SM420 swap. It occurs to me that I don't...
Like most here my Jeep has been painted a million times. This is the underside of the cowl. 1971 CJ5. Anyone[ATTACH] know what color this...
Happily, the Jeep is very drivable. I need a place for the phone, coffee cup and maybe a little storage. I could build something out of wood or...
I searched around a bit and didn't see this discussed. I enjoy my 3:73s with the V6 on the road. I would like a little lower gear offroad. I...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I want to put my tire where it was stock. Can you all tell if I still have all the bracing? Seems...
I am guessing they are side specific. Anyone have one? Thanks
I have a 1971 with the one piece bellhousing and a T14. I am working on a SM420 conversion and need a two piece bellhousing, actually just the...
I took the front drivers side apart as I had gear oil on my brake shoes. I was surprised to see there was no seal between the axles and the inner...
I am pulling mine apart for a rebuild. When I got to removing the pitman arm there were two sets of marks on the arm, neither of which lined up...
I have some longer than stock shackles on my Jeep. What is stock center to center for the shackle? I can probably just redrill these. Thanks
I have been through the Ross set up for the most part. On jack stands everything is free and happy. It's tough to turn the 31 x 10.5s on...
Anyone done this? It looks likes it would be super tough but I thought I’d ask. Pictures? Thanks
Bought the Jeep, bought a Waulk's harness, slap it in. Then I am "no fuses?" I plan to do in line ones with the blade style fuses. My question,...
It getting to be that season to put the top back on. I got a 1/2 hard top this summer and test fit/drilled holes. In the process I scratched the...
I pulled the transmission and transfer case last weekend and replaced seals. I still have a leak in the transmission in the front. Drip between...
Separate names with a comma.