1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Vaseline as a prelube?

Discussion in 'Early CJ5 and CJ6 Tech' started by Old Bill, May 5, 2005.

  1. May 5, 2005
    Old Bill

    Old Bill Aggressively passive....

    Really Southern...
    Joined:
    Nov 12, 2004
    Messages:
    822
    Hey guys,

    I've heard that you can use Vaseline as an assembly lube. Here's the specific question....When I change out my rear main seal, can I use Vaseline on the crank bearings and seal instead of engine oil? The thinking is that the Vaseline will "stay put" better and not get all over the surfaces that I need to seal with RTV. Any thoughts?

    TIA
     
  2. May 5, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,349
    NO.........STP makes a gud prelube
     
  3. May 5, 2005
    Old Bill

    Old Bill Aggressively passive....

    Really Southern...
    Joined:
    Nov 12, 2004
    Messages:
    822
    Checker/Autozone? STP Prelube, is it labeled as such?

    Thanks!
     
  4. May 5, 2005
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Federal mogul makes an assembly lube that is thick and is designed for assembly of parts.
     
  5. May 5, 2005
    m38willys

    m38willys Jeep Vice 2024 Sponsor

    Green Cove...
    Joined:
    Sep 30, 2002
    Messages:
    690
    I used vaseline and KY once to prime an oil pump. worked fine.
     
  6. May 5, 2005
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    I've used STP oil treatment, straight from the can. Real assembly lube is likely better.

    Vaseline may work, maybe not... I wouldn't chance it on hearsay.

    For AMC V8s, the FSM recommends packing the oil pump with vaseline to prevent cavitation at startup. Many use a preoiler instead.
     
  7. May 5, 2005
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    I did to, and Its works fine for that but you don't use it on engine bearings, cams, and general assembly of engine parts and such.
     
  8. May 5, 2005
    Old Bill

    Old Bill Aggressively passive....

    Really Southern...
    Joined:
    Nov 12, 2004
    Messages:
    822

    There's a bad joke in there somewhere.... ;) Anyhow, I'll either pick up some assembly lube or STP treatment and use that. Thanks for the info...
     
  9. May 5, 2005
    Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    North Central FL
    Joined:
    Jun 15, 2003
    Messages:
    2,155
    Just go to FLAPS and get some engine assy lube.. it's cheap insurance..

    BUBBA
     
  10. May 5, 2005
    vanguard

    vanguard

    This whole thread concerns me. R)
     
  11. May 5, 2005
    kamel

    kamel Senior Curmudgeon

    Erlanger, Kentucky
    Joined:
    Jun 10, 2003
    Messages:
    891
    Aargh!

    Let's turn this into a multiple choice question.

    If I was spending all that money to do a quality rebuild on my engine, what pre-lube would I use?

    A) Vaseline
    B) Vicks Vapo-rub
    C) K-Y Jelly
    D) Knuckle Pudding
    E) Federal Mogul engine assembly lube
     
  12. May 5, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,349
    It all sound kinda Kinky
     
  13. May 6, 2005
    AKCJ

    AKCJ Active Member

    Fairbanks, Alaska
    Joined:
    Aug 12, 2003
    Messages:
    1,035
    I'm not gonna touch this with a 10' pole!
     
  14. May 6, 2005
    Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    North Central FL
    Joined:
    Jun 15, 2003
    Messages:
    2,155
    WWMD

    What would Mikey do.. referring to Mikey in the picture above..

    BUBBA
     
  15. May 6, 2005
    67cj5

    67cj5 Member

    Oregon
    Joined:
    Oct 15, 2004
    Messages:
    347
    Vaseline clogs up oil filters when it cools there. I say no to using it on internal engine parts. Use a good assembly lube.... And where the Heck did the whole Idea of KY come from? And I thought I was warped.
     
  16. May 6, 2005
    Roboter

    Roboter Klaatu Barada Jeepto

    Loomis California
    Joined:
    Apr 13, 2005
    Messages:
    316
    You guys crack me up! R) R) R) R) R) R) R) R) :D
     
  17. May 6, 2005
    wingtime

    wingtime Member

    Clearwater FL
    Joined:
    Mar 20, 2003
    Messages:
    143
    Wells lets see... option C is water based so I wouldn't use that. and as for option D if you can produce enough of that to prelube an engine you should consider new career in adult films! R)
     
  18. May 7, 2005
    jeepdaddy2000

    jeepdaddy2000 Active Member

    Eagle Point oregon
    Joined:
    Jun 24, 2004
    Messages:
    1,143
    Mikey's the BOMB!!!!!
     
New Posts