1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Generator Bracket (m38-cj3a)

Discussion in 'Flat Fender Tech' started by houleyh, Jun 19, 2021.

  1. Jun 19, 2021
    houleyh

    houleyh New Member

    Quebec
    Joined:
    Jun 30, 2020
    Messages:
    42
    Hi, This bracket is supposed to be the generator's bracket. Understanding that I will move to an alternator, do I still need this bracket or I should get rid of it I'm rebuilding the frame? Thanks YH P1010812R.jpg
     
  2. Jun 19, 2021
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,102
    That's actually a bracket for a military 24 V voltage regulator. not needed.
     
  3. Jun 21, 2021
    Bill F

    Bill F Finally running

    Hillsboro NH
    Joined:
    Sep 22, 2002
    Messages:
    588
    I wouldn't get rid of it in case that someone wants to put the 24 volt parts back in it some day
     
  4. Jun 21, 2021
    houleyh

    houleyh New Member

    Quebec
    Joined:
    Jun 30, 2020
    Messages:
    42
    Chopped it already Will make a 3A out of this M38. Thanks.

    YH
     
  5. Jun 22, 2021
    52M38-73CJ5

    52M38-73CJ5 Member

    Wenatchee WA
    Joined:
    Nov 11, 2020
    Messages:
    154
    If you have stock M38 parts you will be getting rid of. There are a lot of people out there that would like to get their hands on them. I purchased aftermarket lighting and other items. Old stock would have been much better.
     
    ojgrsoi likes this.
New Posts