1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Jeepster VIN Numbers

Discussion in 'Jeepster Commando and Commando Tech' started by Hawkes, Aug 7, 2006.

  1. Jul 31, 2020
    KCDIR

    KCDIR New Member

    Greenville, TX
    Joined:
    Jul 30, 2020
    Messages:
    3
    Thanks for replying! What year does this serial number fall in?
     
  2. Aug 1, 2020
    bigbendhiker

    bigbendhiker Member

    U.S.
    Joined:
    May 26, 2019
    Messages:
    318
    Sorry, but that info seems to be scarce for Jeepsters. There's lots on the various CJ's, but not much on the C101's. If I were to take a WAG I'd say '67 or '68. You can go through this thread and see if your serial number is close to anyone elses. That may give you a clue. What does your title say?
    Maybe someone else will respond with more info?
     
  3. Aug 1, 2020
    KCDIR

    KCDIR New Member

    Greenville, TX
    Joined:
    Jul 30, 2020
    Messages:
    3
    Thanks.
     
  4. Oct 12, 2020
    dave74

    dave74 Sponsor

    San Angelo, Tx
    Joined:
    Oct 27, 2006
    Messages:
    167
    SJT - Going on 31 years.
     
  5. Oct 12, 2020
    dave74

    dave74 Sponsor

    San Angelo, Tx
    Joined:
    Oct 27, 2006
    Messages:
    167
    28150 Falls into the 1969 range of other titled units. Remember until the Feds mandated the year be part of the VIN number a lot of vehicles got titled for years other than their production year.
     
  6. Jan 6, 2021
    Robert Wight

    Robert Wight New Member

    Houston, Tx
    Joined:
    Jan 5, 2021
    Messages:
    23
    VIN: J3F89FVH18834
    Nov, 1972 (though titled as a 73)
    304-V8, T14, D20
    Houston, Tx

    Just purchased, project in the works.
     

    Attached Files:

    colojeepguy likes this.
  7. Jan 6, 2021
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    A November '72 build date is not remarkable. Nov '72 is in the middle of the 1973 model year. Runs from about July '72 to June '73, just FYI.

    A 304 only came with the T-15, not the T-14. A T-14 is not up to V8 power, IMO.

    First post - welcome from Boston.
     
  8. Jan 6, 2021
    Robert Wight

    Robert Wight New Member

    Houston, Tx
    Joined:
    Jan 5, 2021
    Messages:
    23
    you're right, had it as a T15 in my note book...... we'll chalk it up to fat-fingers.
     
  9. Jan 27, 2021
    ghansen

    ghansen New Member

    wisconsin
    Joined:
    Jan 22, 2021
    Messages:
    1
    what year do you guys think on this one, was told its a 69

    8702017 10395

    i read all what the 8702017 means pretty much, is this like the 395th one off the line?
     
  10. Aug 24, 2021
    Jeepstermaster

    Jeepstermaster New Member

    Tehran - Iran
    Joined:
    Aug 20, 2021
    Messages:
    8
    My yellow hardtop 68 is:
    8705F1728538
    And 69 Convertible:
    870201651194
     
  11. Oct 13, 2021
    David Hodson

    David Hodson New Member

    Traverse City...
    Joined:
    Oct 4, 2021
    Messages:
    8
    I have purchased a project 71 Jeepster Commando last week. The Vin on the title, firewall tag, door sticker, and frame all match. 8705f153271x. Build date was November of 1970. It had the 4 cylinder engine originally with manual steering, and manual brakes. Even being a 71 it still had the Ross type steering. But does have 11 inch brakes. it came with a Dauntless 225, and turbo 400, plus the parts to convert to saginaw steering. extra doors, bumpers, grills, and so many other parts...It took me days to unload and shelf all of them. Overall the body is in pretty good shape with the rockers needing the most attention.
     

    Attached Files:

  12. Oct 14, 2021
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,110
    Really? Maybe because it's a 4 cyl? My 70 has the Saginaw steering.
     
  13. Oct 19, 2021
    David Hodson

    David Hodson New Member

    Traverse City...
    Joined:
    Oct 4, 2021
    Messages:
    8
    I am guessing because it was a plain Jane with 4cly and manual steering the leftover ross parts were sourced. This would have been built a few months after AMC took over control of the factory. I do have the parts to convert it. Its not high on my list as the current steering has virtually no slop and only about 1 inch of free play in the steering wheel.
     
  14. Oct 19, 2021
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Mmm ... I don't think that leftover parts were the issue. Speculating. More likely Jeep sold so few of the 134 Jeepsters that they did not invest in the engineering to upgrade the steering along with the V6 models. AMC comes in, looks around, and asks what can they do quickly to make the current offerings more appealing and boost sales? AMC had little incentive to do anything with the 134, considering they had their own substantially more modern stable of engines.

    I'm surprised that Kaiser ever developed, built and sold a 134 Jeepster. What were they and their customers thinking?
     
    Last edited: Oct 19, 2021
    colojeepguy likes this.
  15. Oct 20, 2021
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    I used to work on an F-134 Jeepster back in the day, probably around a '68. They existed, but not too popular.
    -Donny
     
  16. Oct 20, 2021
    David Hodson

    David Hodson New Member

    Traverse City...
    Joined:
    Oct 4, 2021
    Messages:
    8
    As soon as I find some frame mounts for my Dauntless v6 I will start the process of installing it...I removed amc v8 mounts...
     
  17. Nov 8, 2021
    jbjeeps

    jbjeeps Member 2022 Sponsor

    The Idaho side...
    Joined:
    Jun 12, 2010
    Messages:
    528
    I brought this home recently. It's a parts Jeep: body is rough, rust, missing sheet metal, hood probably off different vehicle, doesn't match body color, no marker lights on hood or fenders. Bought it mainly for the Dauntless engine and drive train. Haven't decided what I'll do with the rest of it yet. Has a Ross box, T14, D20, rear diff has tapered axles and a Power Lock. Vin plate on driver's side firewall #8705 H17 57xxx. I've read through this thread and it looks likely it's a mid to late 1969, half cab pickup, really close to the build date of the 1970 CJ5 I started a thread on in the Builds forum.
     
    Last edited: Nov 8, 2021
  18. May 18, 2023
    Brian Bennett

    Brian Bennett New Member

    Buffalo NY
    Joined:
    May 18, 2023
    Messages:
    2
    Hi.
    Just found this forum while looking to Vin info for my recently purchased Kaiser Jeepster Commando pickup.
    Vin is 8705 H16 18607 and I believe it's a '69. Its been modified long before my ownership, lifted and it seems to me that the tailgate area has been shortened, but I haven't proven that with a tape measure against another Jeepster. I can't seem to post photos here. Says every file is too large. It's still currently in Arizona and I'll be getting it transported here to Buffalo NY in about a month. Plans are for painting and then immediately undercoating it and parking it mostly in the winter months.Here's a link to my Google photo folder if anyone is interested.

    https://photos.app.goo.gl/c6WWkh1EiqQr1w4G9
     
    JWillys58 and vtxtasy like this.
  19. May 19, 2023
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,110
    Decent looking JC, not too rusty. Has a spring over lift which is usually bad. PS is a plus. I don't think it's been shortened but there is a lot of bondo in the back.
     
  20. May 20, 2023
    Brian Bennett

    Brian Bennett New Member

    Buffalo NY
    Joined:
    May 18, 2023
    Messages:
    2
    I've dealt with spring over lifts, as long as there's no lift blocks they do ok just gotta make sure you keep those u-bolts tight. Yes seems to have had some rust repairs, but as far as I can tell it wasn't deep. The guy we bought it from was convinced the previous owner had "shortened" the tailgate area, but I'll eventually take a tape measure to it to see if that's true. If not, then they just filled the panel gap in the rear. Its got a bunch of weird stuff under the dash, making me think it either had a plow on it at one time, or it had a winch driven off of a pto. When it gets here I'll be able to do a much better inspection than I did when it was sitting in Arizona in the dirt.
     
    colojeepguy likes this.
New Posts