1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

F134 Timing Mark

Discussion in 'Early CJ5 and CJ6 Tech' started by mickeykelley, Oct 24, 2020.

  1. Oct 24, 2020
    mickeykelley

    mickeykelley Well-Known Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,908
    On my ‘58 F134, the timing mark which is attached to the timing cover appears to be wrapped/bent back against the cover. Should it be bent back or sticking out over the crank pulley where the groove is? I worry about bending it back, if that is where it should be, and it breaking off.
     
    mickeykelley, Oct 24, 2020
    #1
  2. Oct 24, 2020
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    Yours sounds correct, it points down.
     
    Glenn, Oct 24, 2020
    #2
  3. Oct 24, 2020
    mickeykelley

    mickeykelley Well-Known Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,908
    I used Scoutpilot's method of setting the timing and wanted to check it just to see where it ended up. I had forget to find this out the last time I messed with the timing light. I found a picture of when I pull the engine for the rebuild and it was the same as it is now. Thanks for the confirmation.
     
    mickeykelley, Oct 24, 2020
    #3
New Posts