1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

more sm465 disassembly questions

Discussion in 'Intermediate CJ-5/6/7/8' started by DrDanteIII, Aug 15, 2010.

  1. Aug 15, 2010
    DrDanteIII

    DrDanteIII Master Procrastinator

    Milford NJ 08848
    Joined:
    Mar 21, 2007
    Messages:
    1,516
  2. Aug 15, 2010
    dakardad

    dakardad New Member

    SLC Ut
    Joined:
    Jul 3, 2010
    Messages:
    26
    I think the best way to remove them is with a sharp cold chisel of about a 1/2in width. The bushings ore made from a brittle material. A few moderate hits along the bottom of the 'scallops' on two opposing sides will do. Ive yet to ding the surface of the shaft, the bushing go 'ping' and their off. They are however destroyed in the process. Buy new ones.:beer:
     
  3. Aug 16, 2010
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,361
    Yep. Cold chisel, split down the the middle.
     
  4. Aug 16, 2010
    DrDanteIII

    DrDanteIII Master Procrastinator

    Milford NJ 08848
    Joined:
    Mar 21, 2007
    Messages:
    1,516
    Sounds good.


    I'm note worried about the shaft anyway. That's the part I'm replacing for the swap.
     
  5. Aug 16, 2010
    DrDanteIII

    DrDanteIII Master Procrastinator

    Milford NJ 08848
    Joined:
    Mar 21, 2007
    Messages:
    1,516
    worked like a charm!
     
New Posts