1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Will Dana 20 Shifter Housing Bolt And Work On Dana 18?

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, Sep 18, 2017.

  1. Sep 18, 2017
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Looking for any info or experiences to bolt a dana 20 shifter housing/output housing onto a Dana 18?
    What I am looking to do is try extend my shifters forward a bit to clear seats. The original position of the Dana 18 shifters will interfere on my project.
     
    DanStew, Sep 18, 2017
    #1
  2. Sep 18, 2017
    Oldriginal86

    Oldriginal86 Member

    Pasadena, Md.
    Joined:
    Nov 5, 2014
    Messages:
    592
    When I put the V8 and automatic in my '61 I moved the shifters forward about 4" using a length of 3" channel. It fit/ bolted where the shifter pivot was. Made shift rail extensions from 3/4" stainless rod. I can take some pictures and send them to you to post if interested.
     
    Oldriginal86, Sep 18, 2017
    #2
  3. Sep 19, 2017
    ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Spokane Valley, WA
    Joined:
    Aug 13, 2015
    Messages:
    6,683
    ^This. The D18s with the single shifter are easier to do this because the rails are already drilled rather than notched, but I've done it with both styles.

    On the ones with the twin-shift housings, I drilled a hole horizontally through the notched area of the rails, and I used a piece of 3/4" pipe over the rail with a bolt through a matching hole. The rail OD is 5/8" IIRC, but you want it a hair oversized to allow for the vertical movement in the swing of the shifter.

    I made a bracket for the shifters off of either the trans mount bolts or the top cover bolts, depending on where I needed them.
     
    ITLKSEZ, Sep 19, 2017
    #3
  4. Sep 20, 2017
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    I have a single stick assembly for a D18 I would love to see exit my storage. PM me if interested.
     
    Posimoto, Sep 20, 2017
    #4
New Posts