1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

'71 CJ5

Discussion in 'Builds and Fabricators Forum' started by txtoller, Jun 20, 2014.

  1. Jester

    Jester New Member

    What is not to LOVE? I hope mine turns out half as nice.

    Keep it up!



    And thanks Fesser.
     
  2. Jester

    Jester New Member

    [​IMG]

    This shot just HAS to be here. Gives me a woody. lol
     
  3. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Well, been a while....let me just say, I take 2 steps forward and 13 back.

    Had issues with the the ignition and carb, got that worked out.
    Had a leak around my transfer case.....well, lets just say I have to rebuild that baby....and I may need a few gears. Keeping my fingers crossed that the same issue did not happen in the transmission. I have no idea how I missed this earlier, but thank god for the leak!

    [​IMG]
    [​IMG]

    Good news got the brake lines replaced, have to get a new bleeder.

    Got the radiator and grill out, and ready to mount the electric fan. It will have to be a pusher, but it is going to be plenty of air flow, with my big radiator.
     
  4. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    those gears look like the boys ,the nut at the trans end was loose and crunched some gears,and busted the case...only lasted a few months .
     
  5. 47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    Your jeep is beautiful. I love the color.
     
  6. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor


    Thanks!
     
  7. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor


    Looks like there was some water in the case, so now I'm going to pull it and the transmission...now looking for a 420 or 465 to put in....and will change to ta 2 stick transfercase.
     
  8. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Got the radiator/fan/grill back on and rerouted the P/S line.....

    [​IMG]
    [​IMG]
     
  9. Focker

    Focker That's a terrible idea...What time? Staff Member

    Looks nice. You should get a rubber grommet, splice it and slip it in the hole for the PS line. I know it won't protect the line, but it'll look clean like the rest of your build. Paint the cut metal with a small brush to avoid rusting under the grommet.

    It's interesting that you and Chris are both usiing electric fans, but one guy's using a push and the other a pull.
    Link - 2X4 frame for my CJ2A
     
  10. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I did just that, great minds thinks alike...
     
  11. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

  12. Focker

    Focker That's a terrible idea...What time? Staff Member

    (y)

    Cool bumper too!
     
  13. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Thanks,

    The gal that built that is extremely talented!
     
  14. uncamonkey

    uncamonkey Member

    Gal? just kidding. I know a woman that could back up a semi trailer in a manner that would put most men to shame.
     
  15. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Well, been slow going, but now that I have the ignition and carb figured out, will be able to piece it back together a little quicker. Still have to pull the transfercase and transmission. Waiting on the gauges to come in hopefully, they will arrive this week. Did some clean up on the headlights and will have to do a little cutting on the housing for the head lights.
    [​IMG]
    [​IMG]
     
  16. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    New school bling for an old school Jeep.

    [​IMG]
     
    OrangeCJ5 likes this.
  17. johneyboy03

    johneyboy03 The green beast

    I always wanted to see the look on a cj prior to buy a set for mine. If you can post a night picture it would help me making my choice.


    Great jeep by the way :)
     
  18. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I will do that when I get home from work.
     
  19. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    you guys are killing me with these purty jeeps
     
  20. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Just got word that my custom gauges have shipped, should be here Tuesday! Damn, I may actually, finish this thing!