I recently rebuilt a 1970 CJ5 with a F134 and a T90. Dropped the transmission and put in a new clutch and shifter top with forks. The...
I just finished rebuilding my T90/D18 as per ShnitzlHaus. I used a sealed front bearing but now, after coupling it to the bell housing and fill it...
Where can I get a set of 3/8 off-set dowel pins? My bellhousing is off by 20 thousands TIR. That is after installing the dowel bolts and torquing...
Can I use Mobilgear 600 XP 200 oil in my transmission and transfer case? It is a 90 mineral oil. On the MSDS says:"Optimised resistance to rust...
Can I sandblast my take-out T90 parts to remove surface rust and dirt? Would that affect the surface hardening? It is easier and faster than using...
Over Memorial Day weekend I finished up the installation of my rebuilt T90 trans and Dana 18 t-case for my 1964 CJ5 (F134 engine). My old man had...
How hard would it be to adapt a 308(304, my bad!) to my t90 that I currently have attached to a f134? Depending on the amount of work involved I...
Separate names with a comma.