-
Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.Dismiss Notice
timsresort's Recent Activity
-
timsresort liked Cj5dale's post in the thread Transmission And Transfer Case Oil.
https://www.dbsupply.com/harvest-king-api-service-gl-4-ep-sae-90-gear-oil-2-gal.html
May 20, 2024 at 10:10 PM -
timsresort replied to the thread Transmission And Transfer Case Oil.
Thank you Pete. That is informative. This thread is important, for me, considering that I can't attest to what is actually in any of my...
May 20, 2024 at 9:45 PM -
timsresort liked PeteL's post in the thread Transmission And Transfer Case Oil.
Read this if you want information rather than opinion. https://www.widman.biz/uploads/Transaxle_oil.pdf
May 20, 2024 at 9:38 PM -
timsresort liked WYOMIKE's post in the thread Transmission And Transfer Case Oil.
You could be very correct, I admit I am no expert on the subject. But as hard as it is to find parts anymore and sense at my age I don't...
May 20, 2024 at 9:37 PM
-
timsresort replied to the thread 44 Floater.
The shafts are 1.250 and the spindles are 1.260, so .010 comes out of the spindle to pass the fattest part through, then there is a...
May 20, 2024 at 9:35 PM -
timsresort liked Johns1967CJ5's post in the thread My 67 CJ5 build.
Ahhh, ☀️ summer [img]
May 20, 2024 at 8:51 PM -
timsresort liked wheelie's post in the thread The B3 3b Attempt.
Got the bolt on stuff removed from the frame today. The axles are original to my '71 and will find their way back to it. The Rancho lift...
May 19, 2024 at 9:53 PM -
timsresort replied to the thread 44 Floater.
But then you have all that extra stuff to go wrong, air lines, compressors, solenoids, o-rings, switches, fuses. Seen it way too much on...
May 19, 2024 at 9:44 AM -
timsresort liked Jw60's post in the thread 44 Floater.
The index needs turned down to 2.875 for tapered axle housings and I *think* the major diameter for the 19 spline is 1.313".
May 18, 2024 at 10:58 PM -
timsresort replied to the thread 44 Floater.
Oh, yeah, the selectable locker. I forgot about that. Guess you can't get a 19 spline ARB.
May 18, 2024 at 10:47 PM -
timsresort liked Jw60's post in the thread 44 Floater.
It's to run 30 spline selectable lockers with flanged shafts. I've wheeled with a handful of those jeeps.
May 18, 2024 at 10:43 PM -
timsresort liked Jw60's post in the thread 44 Floater.
Careful, That's for 30 spline inners. The spindles are different and the inner bore will cut through the d25-drum 30 spindle at the keyway.
May 18, 2024 at 10:36 PM -
timsresort replied to the thread 44 Floater.
Thanks Jay, I think I have read that before, and I believe it led to expensive custom spindles being made to accept 30 spline shafts. A...
May 18, 2024 at 10:35 PM -
timsresort liked Jay's WWII Jeeps's post in the thread 44 Floater.
Here's a good thread on modifying spindles for a free float conversion. Jay...
May 18, 2024 at 10:29 PM -
timsresort replied to the thread 44 Floater.
Yes it does, the shoulder gets turned down enough to fit in the axle tube. If you have the option, D30 spindles have a little more meat...
May 18, 2024 at 10:12 PM