I'm 6'-0", and driving my '67 the with stock front seats (which sit an inch or two lower than the repro seats sold by Rugged Ridge, Smittybilt,...
Rozcoking23 used a “Flow Kool” (though he probably meant FlowKooler) - you might contact him for more info:...
A friend of mine has a '53 CJ-3b with its original F134 that was his grandparents', which he got running again a year or so ago. At that time he...
Yep, they will....I have one exactly like that on my '67. I also reproduced the original foil Whitco decal these roll bars came with. [IMG]
I installed an OEM Jeep 7-blade fan on my Dauntless last year, and it pulls a great deal more air and cools noticeably better than the previous...
I'm not a fan of Kaiser Willys, but here's a link to an NOS 4-pole Pollak ignition switch. The price isn't too bad, and it looks like the the...
At 62, I’m often wondering what I used to know that I can’t remember forgetting….
The smaller end is threaded 5/16-18, and the larger end is 3/8-16. Overall length is approx 2-5/16". Note the traces of "Buick Green" on the...
I may have just found the answer to my own question. The double-ended stud looks very similar - though not identical - to this "GM Engine Mount...
I'm pretty sure this came off my Dauntless at some point, but don't know what it is or where it went.... [IMG]
If you want to explore possibly having your problem carb professionally rebuilt, send a PM to Scoutpilot above. He runs Old Jeep Carbs LLC (...
The 7-blade fan you're referring to is indeed from an AMC straight six. I bought one of those same fans last year, and found that except for the...
I can only narrow it down to somewhere between a '69 and a '71. Maybe some of the more knowledgeable ECJ5er's can pin it down closer than that?
Correct - it has a floor starter button / switch.
Separate names with a comma.