Here are some photos of other bearings etc.... Rod bearings (top and bottom shells) for 1 and 2 that share same journal - front is to the right...
i'll buy the 383 if you pay for the axles that I am going to need for that much torque....given my engine history, the 383 would die before the...
Here's your mini keg https://m.facebook.com/marketplace/item/1164922907830512/?ref=browse_tab&__n=K
probably because the builder didn't know what he was doing.....:(
I'd also like to know what was the cause....like was their an oiling issue due to my error with cleaning out oil galley or whatever, or did I miss...
you won't like it....no power brakes, no power steering with full lockers, D18 with OD, big mud tires that are noisey and chunked up and out of...
yup....crank journal is damaged...so the crank has to come out which basically means pulling the engine and pretty complete disassembly. Time to...
Its not good...the question will be how bad. I got the bottom cap off the #1 rod and looks like this: [img] I haven't looked at the journal yet,...
that is why we invite Julius along! :beer:
thats kind of what I was thinking....these are even easier at NAPA...
I can find all the parts I need to build these 11" brakes at NAPA with the exception of the wheel cylinder links....I keep coming across the 1414...
Already did that....last fall I added exhaust gaskets to see that would help....it's nowhere near the top of the engine. I've been planning to...
Well....I think I identified the engine knock I've been chasing for a year. Its finally gotten loud enough that I could use a stethoscope around...
So I bought the pair shown above.... there were/are rough.....really they needed sandblasting, but various wire wheels etc got them looking a...
Separate names with a comma.