1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Small Garages Or Small Workshops Thread

Discussion in 'The Tool Shed' started by Focker, Jun 24, 2017.

  1. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Dave, how old is your house? Pretty sure that garage style was a "feature" for new houses from the early 20th century. In this era, the Model T was changing transportation in America, and these garages seem to be "Model T sized" - like a budget-priced carriage house for your budget-priced automobile. I see a lot of these little garages at period houses around here. Seems like the idea of additional space in the garage for storage or woodworking or whatever did not become popular until the 40s or 50s, and these earlier garages had just enough room for a smallish car and entry/exit from the car.
     
  2. tarry99

    tarry99 Member

    Hey Dave, 1 bay 2 bays or 5 bays..........never seems like there is enough space , just got to make the space you have work.......
     
    fhoehle and Twin2 like this.
  3. wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    So true, Terry. I should be glad to have a garage at all. I realize that I am a spoiled American. Lots of folks in this world don't have a roof over their own heads, much less a roof for and extra car.

    Tim, I'm not really sure how old this joint is. Never that interested in it's history since we never had any intention of staying here forever. It's been remodeled and added on to at some point. That garage may even have been added at some point but, I can't truly say.

    If I had to guess, I'd say the house, any way, was built in the 50's. Maybe 40's. There are lots of these little 1 car garages around this neck of the woods.

    BTW, it is for sale. ;)
     
  4. Focker

    Focker That's a terrible idea...What time? Staff Member

    Look inside the breaker/fuse box for a date.
     
  5. wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    I just had our panel updated to Square D-Homeline series breakers and panel, since we're selling. We had old "Push-Matic" breakers and they were obviously outdated. I still have the old panel in the basement and looked for a date on it to no avail. Here is a pic I put on craigslist a few weeks ago hoping to sell the old breakers for a couple bucks.

     
  6. Keys5a

    Keys5a Sponsor

    Look inside the toilet tank and tank lid for a date, provided they have not been "updated". Pretty reliable way to date a house.
    -Donny
     
    sterlclan likes this.
  7. rumble66

    rumble66 New Member

    Pushmatic is 1960s/1970s. An oldtimer Electrician can likely date better.
     
  8. luvdabeach23

    luvdabeach23 Making an honest attempt

    I have a 2-car attached garage with 10' ceiling height. So I'm able to hang shelves from the ceiling. The garage is still a mess because I'm able to cram a lot more crap in it.
    Garage Shelves.jpg
     
  9. Focker

    Focker That's a terrible idea...What time? Staff Member

    My latest addition.

    I took my extra bolt bit sizing gauge and mounted above the workbench. I put a spacer behind it to allow me to stick the bolts/screws through it.
    [​IMG]
     
    Last edited: Jul 29, 2017
  10. Mcruff

    Mcruff Earlycj5 Machinist

    Bolt sizing?
    Drill gauge.:D
     
  11. Focker

    Focker That's a terrible idea...What time? Staff Member

    Yeah...

    I guess I size up the bolt in order to see what bit I need.
     
  12. Bowbender

    Bowbender I'm workin' on it!

    How many rolls of electrical tape do you have on that hammer handle? :p
     
  13. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Tough crowd, Focker. :(
     
  14. rusty

    rusty Well-Known Member

    Hay, I have one of those bolt gauges , somewhere ? :)
     
  15. Focker

    Focker That's a terrible idea...What time? Staff Member

    No problem... They're just jealous because I know where my stuff is. :sneak:
     
    Bowbender likes this.
  16. rusty

    rusty Well-Known Member

  17. Muzikp

    Muzikp Active Member

    GAH!!! You guys are killing me with these nice spaces. I have a very very small garage and I'm a part time luthier (guitar builder) so my shop has to stay setup as a guitar shop not a Jeep shop. To do Jeep stuff I have to move many things over to have room to pull the Jeep in and work on it. I park the Jeep in the shop in the winter but there is no room to actually work on it. These are old pictures, there is actually a very large dual drum sander in there now also but here it is as a guitar shop. You can imagine how much stuff I have to move to work on the Jeep in there.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Here's a winter shot with the Jeep stuffed in there. Jeep is covered in sawdust and lacquer overspray.
    [​IMG]

    I have an indoor guitar shop as well, but very little Jeep work can go on in there, although here is my differential in pieces on my guitar bench.
    [​IMG]

    And a shot where my worlds came together on the bench, differential and Les Paul guitar build
    [​IMG]

    Indoor shop when it's clean

    [​IMG]

    [​IMG]

    [​IMG]

    What it typically looks like
    [​IMG]

    I'm really starting to desire a place with a nice size shop. I can't imagine moving though. #firstworldproblems
     
  18. Focker

    Focker That's a terrible idea...What time? Staff Member

    Nice guitars. I've built 2 total, with the help of Warmoth and Stew Mac.
     
    tarry99 likes this.
  19. Muzikp

    Muzikp Active Member

    Seriously? That's awesome, it's rare to meet people that have built a guitar. I build from scratch and do a lot of custom stuff for people. I don't use Warmoth but get a lot of tools and supplies from StewMac. I have many build threads on the TDPRI forum. Finishing up this custom build today.

    [​IMG]

    [​IMG]
     
    Danefraz, piffey263 and Desertdave66 like this.
  20. Focker

    Focker That's a terrible idea...What time? Staff Member

    Beautiful.

    Here's one of mine...Minimal...Just what I wanted. I wish I could build from scratch, but I don't want to invest in the tools. :rolleyes:

    Solid mahogany with flamed maple laminate top stained with a satin finish.
    250k push-pull volume pot...Pulling the pot up splits the coil on the Dimarzio "Fred" pickup.

    The pictures don't do it justice.
    [​IMG]

    [​IMG]