1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Wheel Cylinder Link Install

Discussion in 'Early CJ5 and CJ6 Tech' started by FinoCJ, Apr 14, 2019.

  1. FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Rebuilding oem 10" rear brakes on the cj5. I cleaned up the old wheel cylinder links and am going to install them into new wheel cylinders...do I need to do any lubrication on the link before inserting them?

    thanks
     
    FinoCJ, Apr 14, 2019
    #1
  2. Oldriginal86

    Oldriginal86 Member

    I’ve always put a dab of white lube on each end.
     
    Oldriginal86, Apr 14, 2019
    #2
    FinoCJ likes this.
  3. FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    I had the white lithium grease out for lubing the shoe contact spots on the backing plates etc, so put a little on the links as well. thanks
     
    FinoCJ, Apr 14, 2019
    #3
  4. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I use a schmear of Never-Seize.
     
    PeteL, Apr 14, 2019
    #4
    Rick Whitson likes this.