I Need Part Numbers And Manufacturer

I think the parts guy is confused AGAIN.

Rear wheel cylinders are 13/16 inch ID bore and have a straight along the axle thread for the nipple on the brake tube/line

Front are on the 45 degree angle along the front axle and need the "S" tube. USA drivers side face backwards and passenger side 45 degree angle face backwards, they are 1 inch ID bore

Guy is telling me not to buy and he will not restock the wheel cylinders because his reference book STARTS with AMC and does not cover Kaiser Willys.. help

left rear wheel cylinder 13/16 ID bore
Wagner WC 48418
Bendix 33583
Dorman W 37089
Chrysler 938113
Chrysler 938116
Napa 37089
Autospeciality W 87009
Omix ada F 40964


right rear wheel cylinder 13/16 ID bore
Wagner 48419
Bendix 33563
Dorman 37090
Chrysler 938114
Chrysler 938117
NAPA 37090
Chrysler JO938117

Front right wheel cylinder 1 inch ID bore
Wagner 40965
Raybestos 37088
Bendix 33554
Dorman WC37231
NAPA 37231
Chrysler 938115

Front left wheel cylinder 1 inch ID bore
Wagner WC 40964
Bendix 33553
Dorman WC 37230
NAPA 37020


reference data from yoyoparts.com

OK, This IS better NOW

 

Looking at the Dorman parts catalog, it appears that they no longer list wheel cylinders for a '66 CJ5, just a wheel cylinder kit. Check Rockauto for other brands.

 

I changed my rear wheel cylinders to 1" because I could not get the 3/4" but could get 1". Rebuild kits are the way to go if they are at all salvageable.

 

1966 JEEP CJ5 2.2L 134cid L4 Wheel Cylinder | RockAuto

 

Rears wheel cylinders for 10" brakes show 13/16" diameter, 1" for the front.
-Donny

 

Yep read that too

 

Thanks

 

bought mine from Amazon no problem along with brake shoes and drums. 10 " for '71 renegade II

 

NO MINE ARE TOAST

 

the M38A1 J an Army contract thru the Department of Ordinance, read 66cj5

 

Oh, I wish! there were only 126 vehicles for the contract, they took a standard 1966 cj5 and tweaked it. I find more parts thru general cj5