1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Buick V6 Fuel Line

Discussion in 'Builds and Fabricators Forum' started by cj3may, Jul 1, 2020.

  1. cj3may

    cj3may New Member

    Guys I have a question for those who have put in a Buick v6 in to a flat fender cj. The tank has 1/4 line fittings and pump has 5/16 line fittings so what do you end up doing. Run 1/4 inch line or get a new fitting added to tank . help stuck ☹️
     
  2. cj3may

    cj3may New Member

    Posted in wrong spot wanted it in flat fender tech
     
  3. Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    I used hose nipples.
    McMaster-Carr

    got mine from Ace Hardware. A 1/4” and 5/16” and a connector in the middle
     
  4. cj3may

    cj3may New Member

    Thanks going to look for those fittings at hardware store
     
  5. OzFin

    OzFin Vintage Jeep Guy

    If you are going to run flexible fuel hose be sure to get some quality material. A lot of the low price fuel hose is junk and deteriorates in a short time potentially causing a breakdown at minimum or a catastrophic fire.
    Fuel injected fuel hose cost more but is made to a better standard and then there is "submersible rated" fuel hose that is very resistant to gasoline.
    Fuel Line Hose
     
    fhoehle likes this.