1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Tremec 5 Speeds

Discussion in 'Early CJ5 and CJ6 Tech' started by garage gnome, Aug 9, 2020.

  1. garage gnome

    garage gnome ECJ5 welder

    Thinking out loud, is it possible to mate a Dana 18/20 to a tremec 5 speed? :ninja: Asking for a friend... :sneak:
     
  2. Keys5a

    Keys5a Sponsor

    I'd be suprised if anyone is casting an adapter for a D18/20. These transmissions have 3 shifter ports and internal rails. 5th gear is encclosed in the rear tailhousing, so this would be a complex adapter to make. Anything is possible, but a divorced transfer case would make a lot more sense if you had to use the Tremec 5-speed.
    I have a TKO 600 for my '66 Chevelle.
    -Donny
     
  3. Jrobz23

    Jrobz23 Member

    Is the tail housing similar to the gm 4500?
     
  4. Mcruff

    Mcruff Earlycj5 Machinist

    They make a Dana 300 to T5 adapter do not think there’s one for the 18 or 20.
     
  5. garage gnome

    garage gnome ECJ5 welder

    I see they make a 4x4 version. I'm guessing its not much bigger than a T18 or sm465.

    TREMEC TR-4050 Off-Road Manual Transmission Solution | TREMEC Blog: Get Connected
     
  6. colojeepguy

    colojeepguy Colorado Springs

    I've been looking and I cant find a length of the 4wd version, but it looks long to me.
     
  7. Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I was looking at these too. According to Wikipedia (take it with a gain of salt) the length of the 4x4 transmission is 19.5": Tremec TR-4050 transmission - Wikipedia

    Here's one attached to a Ford Modular:
    [​IMG]

    Looks like the size of a T-18 with and additional 6+ inch tail cone out the back. So the 19.5" is probably right. I would be great for a CJ6, but I'm guessing it won't fit in a CJ5.
     
  8. colojeepguy

    colojeepguy Colorado Springs

    But it would be great in a Commando :sneak:
     
  9. Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    It would be awesome in a Commando!
     
  10. Jrobz23

    Jrobz23 Member

    What are you sticking it to?
     
  11. colojeepguy

    colojeepguy Colorado Springs

    I dont know....a D300 I suppose.
     
  12. Jrobz23

    Jrobz23 Member

    In front. Anything fun?
     
  13. Oldriginal86

    Oldriginal86 Member

  14. garage gnome

    garage gnome ECJ5 welder

    Not sure where to get it, but I would guess is a few grand like the car 5 speeds.
     
  15. Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

  16. Keys5a

    Keys5a Sponsor

    I didn't know these things existed. With the price, it may as well not, at least for me. I couldn't justify the expense, but a neat option at least. The ratios seem like the best of both worlds.
    -Donny
     
    Jrobz23 and Fireball like this.