1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Fuel float

Discussion in 'Flat Fender Tech' started by sammy, Aug 7, 2010.

  1. sammy

    sammy Coca-Cola?

    Have a repro sender unit in the Jeep with a plastic float in it. It worked nice for about 4 hours, then the plastic leaked, got full of gas, and now it's history. Anyone have a PN for a brass float that will work with the 2A stuff?
    Thanks
     
    sammy, Aug 7, 2010
    #1
  2. colojeepguy

    colojeepguy Colorado Springs

    You can get one at your local Ford dealer-I can't remember the part # but I'll check tomorrow. BTW if you use the brass float you'll have to make some adjustments (bend) the float arm cause the brass float floats a little lower than the plastic one.
     
    colojeepguy, Aug 8, 2010
    #2
  3. 1970CJ6

    1970CJ6 new mexico air

    Ford part # COAZ-9202-B

    Andrew
     
    1970CJ6, Aug 8, 2010
    #3
  4. w3srl

    w3srl All-around swell dude Staff Member

    Go to your local hardware store and buy a couple of real corks for about .35 cents each. That's what my flatty had in it when I bought it and the fuel gauge was one of the few things that still worked when I bought the Jeep.
     
    w3srl, Aug 8, 2010
    #4