1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by Rozcoking23

  1. Rozcoking23
    Post

    Fan Blade Question

    I finally got the 7- blade fan and it’s mounted. I will see if it makes any difference in my temps and report back. [ATTACH]
    Post by: Rozcoking23, May 30, 2024 at 11:00 PM in forum: Early CJ5 and CJ6 Tech
  2. Rozcoking23
    Post

    Lost Oil Pressure

    I got the motor mostly back together today. I primed the oil pump with my cordless drill, wife was watching gauges and said it was at 50lbs. Still...
    Post by: Rozcoking23, May 30, 2024 at 10:58 PM in forum: Early CJ5 and CJ6 Tech
  3. Rozcoking23
    Post

    1970 Jeep Rebuild

    Got some work done on the JEEP, got everything back onto the motor minus distributor and plug wires. I primed the motor with my cordless drill,...
    Post by: Rozcoking23, May 30, 2024 at 10:54 PM in forum: Builds and Fabricators Forum
  4. Rozcoking23
    Post

    Lost Oil Pressure

    I ended up using a different cover as the one that was on there ended up being cracked.
    Post by: Rozcoking23, May 29, 2024 at 7:53 PM in forum: Early CJ5 and CJ6 Tech
  5. Rozcoking23
    Post

    1970 Jeep Rebuild

    I went up into the attic and went thru all the crates of engine parts I have stashed and found a front timing chain cover to use, completely...
    Post by: Rozcoking23, May 29, 2024 at 7:49 PM in forum: Builds and Fabricators Forum
  6. Rozcoking23
    Post

    Barbie Jeep For My Uncle......

    Now it looks like a real JEEP!….. looking good
    Post by: Rozcoking23, May 29, 2024 at 7:34 PM in forum: Builds and Fabricators Forum
  7. Rozcoking23
    Post

    Show Us Your Jeep!

    I like the stripes.
    Post by: Rozcoking23, May 29, 2024 at 7:28 PM in forum: Builds and Fabricators Forum
  8. Rozcoking23
    Post

    1970 Jeep Rebuild

    Might be ordering a new cover from T/A Performance.
    Post by: Rozcoking23, May 28, 2024 at 11:00 PM in forum: Builds and Fabricators Forum
  9. Rozcoking23
    Post

    1970 Jeep Rebuild

    I stopped for the night after I inserted the distributor to check how it engages the pump shaft. I tightened the hold down bolt and the top of the...
    Post by: Rozcoking23, May 28, 2024 at 10:59 PM in forum: Builds and Fabricators Forum
  10. Rozcoking23
    Post

    1970 Jeep Rebuild

    Update: Got my parts from T/A Performance. New gears, thrust plate, shim pack, adjustable pressure valve. Took my timing chain cover to my buddy...
    Post by: Rozcoking23, May 28, 2024 at 10:54 PM in forum: Builds and Fabricators Forum
New Posts