1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Yj W/s Glass… How-to?

Discussion in 'Quitters' Club' started by PeteL, Oct 16, 2017.

  1. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Anyone here ever replaced a YJ windshield glass (1988)?

    Any tips or cautions?
     
    PeteL, Oct 16, 2017
    #1
  2. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    is this one glued in? if so you want to get as much adhesive off the frame before putting the urethane on and buy good 3m window weld stuff. after setting the glass two inch masking tape will hold it till it cures (about 10 hours) if you can let it sit for a day or two that is better...
     
    sterlclan, Oct 16, 2017
    #2
  3. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Yes, glued. A rubber inner gasket on the pinchweld, then bedded in urethane.

    Good tips, thank you.
     
    PeteL, Oct 16, 2017
    #3