1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Speedometer Removal

Discussion in 'Jeepster Commando and Commando Tech' started by Jbleeds, Aug 19, 2018.

  1. Jbleeds

    Jbleeds Member

    Can anyone tell me how to remove the speedometer housing? Do I unscrew the four screws or can I depress the clips held on by the screws. Not much room to work under the dash and I don't want to mess up the housing. Of course my next question would be how to remove the switch housing next to the speedometer housing!
     
    Jbleeds, Aug 19, 2018
    #1
  2. Daryl

    Daryl Sponsor

    3/8" nut driver is usually the best way. Some used smaller nuts that take an 11/32" though.
     
    Daryl, Aug 19, 2018
    #2
  3. commanlerwrangdo

    commanlerwrangdo Member

    On my Commandos I always just push on the clips to pop out the speedo or the switches housing. Speedo has 4 clips, switches housing has 2. Start with the hardest to get to one and finish with the easiest to get to.
     
    commanlerwrangdo, Aug 21, 2018
    #3