1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

dana 27 lockrite

Discussion in 'Early CJ5 and CJ6 Tech' started by screwcity, Jan 14, 2005.

  1. screwcity

    screwcity New Member

    I have a dana 27 with the spider gears welded....

    Not my doing!!!!

    I assume that I am going to have to replace the spider gears, to make it work like it's supposed to.

    I wouldn't mind a lockrite up front. what is involved with the instalation? Will the lockrite replace the spider gears? Because I don't want to replace the spider gears to make it work normal, then take them out again once I get around to installing a locking device. I feel like it would be money spent twice..

    Rio
     
  2. Doug

    Doug Sponsor

    Wow - that was really weird! I just posted a thread on d27 and lock rights within a few minutes of yours.

    The Lock-Right unit replaces the spider gears. If your spiders are welded - it would be a good swap to get rid of your Lincoln Locker and allow your front axles to at least ratchet around corners when the hubs are engaged.
     
  3. michigan_pinstripes

    michigan_pinstripes I'm not lost, I'm wandering

    Lincoln Locker... R)

    Is that similar to a Miller Locker or Hobart locker? ;)
     
  4. speedbuggy

    speedbuggy Looking for a Jeep now

    That's an old racing trick. Instant positraction ;)

    Not much value in a jeep though...
     
  5. screwcity

    screwcity New Member

    beat you......

    yeah i got the jeep with the front already welded...

    it really pisses me off cause it's just another thing that I had to fix..
    it also came with a poorly done SOA, but that's another story!!

    i'm not certian if there is any benifit to running the gears welded in the front. The back maybe, it might just hop and chirp it's way through the corners.
    I haven't given it a try in the dirt..should I suspect that the steering will be as bad on looser terrain? or is it going to be just as bad.

    i assume that the answer will probably be that I should just swap it out. and that's what led me to the idea that a lockrite would just swap out the welded(err...messed up) spider gears.

    how will a locker in the front handle on the road?
    is it going to be as much of a painin the ***?

    that's all for now
    Rio
     
  6. Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    Just something to keep in mind, usually when you weld spiders you weld them to the carrier so your carrier may be scrap too...

    BUBBA
     
  7. Posimoto

    Posimoto Hopeless JEEP Addict

    If you find that you need a D27 carrier, PM me. I have one.
     
  8. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Here's a good example:

    [​IMG]

    You may need a new carrier...
     
  9. screwcity

    screwcity New Member

    yeah I was worried about that....

    I may in fact need a new carrier....i'll keep you posted....


    Rio