1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1964 Cj5 Hardtop Seals

Discussion in 'Early CJ5 and CJ6 Tech' started by jim6346, Mar 12, 2019.

  1. jim6346

    jim6346 New Member

    Good Morning,

    Does anyone know where I can get the Hardtop side glass and rear hatch glass seals
    for a 1964 Jeep CJ5 Hardtop?

    Thanks!!
    Jim
     
    jim6346, Mar 12, 2019
    #1
  2. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    manufacturer of the hardtop? that would be pertinent information for any suggestions. im sure the various models differ slightly. post a pic maybe and people can help you to identify it.
     
    jeepstar, Mar 12, 2019
    #2
  3. jim6346

    jim6346 New Member

    Here is a pic of the side. Came from the factory with the hardtop.

    Thanks!
    Jim
     

    Attached Files:

    jim6346, Mar 12, 2019
    #3
  4. jim6346

    jim6346 New Member

    Here is a pic of the hatch
     

    Attached Files:

    jim6346, Mar 12, 2019
    #4
  5. Glenn

    Glenn Kinda grumpy old man Staff Member

    Have you got an automotive glass shop near you? If you need the glass too that might be your best bet. They should have the rubber and glass.
     
    Glenn, Mar 12, 2019
    #5
  6. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    any windshield / glass shop will stock that seal material . as glenn stated
     
    Twin2, Mar 12, 2019
    #6
  7. jim6346

    jim6346 New Member

    Yeah, I've checked with my two glass guys, no luck. We do have the glass
    just no seals.

    Thanks,
    Jim
     
    jim6346, Mar 12, 2019
    #7
  8. Glenn

    Glenn Kinda grumpy old man Staff Member

    Restoration Specialties & Supply, Inc. Might try these guys. I think AS1475-WS might be what you need. Don't just take my word for it though, definitely measure glass and metal thickness.
     
    Glenn, Mar 12, 2019
    #8
  9. Greevesman

    Greevesman Member

    I have that hardtop and got the seal material from Steele Rubber. You have to buy the seal extrusion and the locking strip.
     
    Greevesman, Mar 12, 2019
    #9
  10. Greevesman

    Greevesman Member

    Steele part numbers 70-0587-99, and the locking strip 60-0607-99.
    I bought 23 feet of each.
    You can go online to the Steele Rubber website and look at the extrusions.
     
    Greevesman, Mar 12, 2019
    #10
  11. jim6346

    jim6346 New Member

    Greevesman,

    This is exactly what I was looking for thanks!!! On order already :)

    Jim
     
    jim6346, Mar 12, 2019
    #11
  12. Greevesman

    Greevesman Member

    Whoever cut mine at Steele gave me exactly enough of the locking strip and four extra feet of the seal.
    I took it down to the glass shop and had the fellow install the windows. Took about one hour. If you have a suction cup tool and a helper you could probably do it yourself.
     
    Greevesman, Mar 12, 2019
    #12
  13. GTS Dean

    GTS Dean New Member

    You have the Willlys top on yours. Mine is a Koenig. Most any auto glass shop should be able to find you some seals, or show you a catalog of shapes.
     
    GTS Dean, Mar 12, 2019
    #13
  14. Greevesman

    Greevesman Member

    IMG_20150423_140725965_HDR.jpg Willys top.
     
    Greevesman, Mar 12, 2019
    #14