1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

no power

Discussion in 'Early CJ5 and CJ6 Tech' started by 66cj5fl, Apr 25, 2005.

  1. 66cj5fl

    66cj5fl New Member

    i have the dauntless v6 and i changed the valve cover gaskets today. well i got everything put back together go to start it and nothing...no power.... no lights.... no nothing.....so i back-tracked, i noticed taking the passenger side cover off theres a ground wire goin from valve cover to the firewall......could this be the problem????? is it not making a good ground????? just wondering....... HELP!!!!!

    thanks
     
    66cj5fl, Apr 25, 2005
    #1
  2. 66cj5

    66cj5 Jeep with no name

    check the fuseable link. mine grounded when i went to start after the rebuild. also check the battery cables, might be loose.
     
    66cj5, Apr 25, 2005
    #2
  3. Southtowns27

    Southtowns27 Custom Title

    The cable you speak of is a body ground. Check and clean the connections on both ends of your battery cables. Something is probably just loose or dirty
     
    Southtowns27, Apr 25, 2005
    #3
  4. kelly

    kelly New Member

    Sure sounds like a bad ground.Clean all connections, run another separate ground if needed,just to make sure.Good luck
     
    kelly, Apr 27, 2005
    #4