1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Another seat question. The last one, I promise.

Discussion in 'Intermediate CJ-5/6/7/8' started by mcne2026, Oct 18, 2006.

  1. Oct 19, 2006
    mcne2026

    mcne2026 Member

    Buellton, California
    Joined:
    Oct 4, 2006
    Messages:
    70
    A large washer it is then. Thanks for the response.
     
  2. Oct 19, 2006
    original cj5

    original cj5 They call me Mr Bubba

    Murphy, NC
    Joined:
    Sep 30, 2005
    Messages:
    200
    ME LIKEY...I'll have to keep my eyes out for a set, unless, of course, you would like to sell those...Hmmmmmmmmm:rofl:
     
  3. Oct 19, 2006
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Pretty sure those are older, like mid 60s. The belts I recall had black plastic buckles that pulled up to release, with a smaller Jeep label in the middle. Not sure if the RW&B AMC logo was present - I think it was just silver and black. My memory of this is very weak...
     
  4. Oct 19, 2006
    original cj5

    original cj5 They call me Mr Bubba

    Murphy, NC
    Joined:
    Sep 30, 2005
    Messages:
    200
    These are the one I think came out of a P/UP and a Commando. Seems like I saw a picture in an old owners manual. Do these appear to you to be for a CJ as well?

    One tag actually has a "DATE MFG" stamp. It is strange: .48-M-75
     
  5. Oct 19, 2006
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Yeah, that looks kinda right. I don't specifically remember the button, but the colors are right...
     
  6. Oct 19, 2006
    mcne2026

    mcne2026 Member

    Buellton, California
    Joined:
    Oct 4, 2006
    Messages:
    70
    I found the factory nuts for the passenger seat. They were still intact inside the storage bin. Does anyone know what size and thread they are? It is not driveable right now and I don't want to make to many trips to the parts store to find the right size.

    As I figured, the drivers side nuts were removed, but the holes still existed under the bedliner so it was an easy bolt in.
     
New Posts