1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Things I wish I knew before.....

Discussion in 'Early CJ5 and CJ6 Tech' started by Sharps45110, Aug 13, 2007.

  1. Sharps45110

    Sharps45110 New Member

    I recently bought a '66 cj5. After spending some time fixing it up, I have come to some conclusions:
    1. $1,200 for the jeep is not the steal that you thought it was.

    2. When you replace the rear seals, and decide to check the wheel bearings, "just for the heck of it", you better get ready to buy a shop press.

    2. When you build a new battery box, be sure you space it far enough away from the firewall so you can get the battery hold down clamp in place.

    3. A TJ tire / gas can carrier is not "close enough" to a CJ to make it fit without major modifications.

    Feel free to add your own.
    Lee
     
  2. Boyink

    Boyink Super Moderator Staff Member

    I wish I new a heater installation could take the Jeep off the road for 2 years...R)
     
  3. sparky

    sparky Sandgroper Staff Member Founder

    An overdrive and a trailer make up for not having a truck in most cases, well for my purposes.
     
  4. Sharps45110

    Sharps45110 New Member

    Don't ever tell the parts house, "You won't see me again this summer!"
    It just makes you look like a fool when you are back in the next day.
    Lee
     
  5. Glenn

    Glenn Kinda grumpy old man Staff Member

    I'm just going to get it running and driveable. :)
     
  6. Chilly

    Chilly Active Member

    Changing gas tank from below: $100 gas tank plus a few hours cursing at the danged fool who shoehorned that thing in there.

    Changing the gas tank by lifting the rear of the tub: $100 gas tank, $25 parking brake cables, $25 for a few wire cups, $25 poly body mount kit, $500 lift kit, $600 Super Swampers, $125 Kragar white spokes, $75 new u-joints, $20 steering shaft rubber boot, $500 to sandblast and prime rolling chassis, $40 worth of MAP gas, $30 worth of PB Blaster, $150 windshield frame, $50 windshield gaskets, $120 spring plates with skid plates, $350 for another engine, $1800 to rebuild original engine, $50 backup lights, $50 front turn signal lights, $250 radiator, $8 radiator cap, $25 cap, points, rotor, wires, $125 to replace your new cap, rotor, wires with HEI stuff, $75 brake cylinders, $125 stainless brake lines, $75 braided brake hoses...
     
  7. Sharps45110

    Sharps45110 New Member

    Just because you got the axle nut off somehow, doesn't mean that you have the socket to put it back on again.
    Lee
     
  8. Rmeak

    Rmeak 2 mile hi member

    A Jeep needs brakes to stop...and $$$ to get them in working conditionR)
    An old Jeep is like and old house, you fix atleast two other things before you fix the thing you originally set out to correct, seems to be a theme in my neck of the woods these days.

    Last but not least, you need to have an understanding better half to take on any Jeep project.
     
  9. Strider380

    Strider380 Can I have a zip tie?

    Everyone who drives my old CJ5 wants one.

    Air horns are cool on jeeps.

    Stock old jeeps are equal to locked cherokees.
     
  10. MOP

    MOP Active Member

    Triple the estimated job time if more than 3 40-year-old bolts are involved.

    Buy all available bolt-out, damaged nut/bolt remover, etc. type tools BEFORE starting any job involving 40-year-old bolts.

    Soak entire JEEP in PB blaster BEFORE starting any job involving 40-year-old bolts.

    Buy an impact wrench (be it electric or air) BEFORE starting any job involving 40-year-old bolts larger than 3/8" thread.
     
  11. Sharps45110

    Sharps45110 New Member

    Be carefull about using the impact wrench on 1/4" bolts, chances they will break off and you will then have to learn how to use Helicoils for the above mentioned 40-year-old bolts. (*hint* Rear differential cover)
    Lee
     
    Last edited: Aug 13, 2007
  12. Sledgehammer

    Sledgehammer Sure, I'll try it

    Never buy a JEEP off of a guy that uses allen head bolts for everything. Lets just face it, allen wrenches don't work well.

    Also, PO added aluminum screen door turnbuckles won't work for clutch linkage (broke and hit a tree) and will cause you to curse on video and in front of women and children.
     
  13. scott milliner

    scott milliner Master Fabricator

    Never buy premixed antifreeze.

    I like to pay for water. :rofl:
     
  14. TexColorado

    TexColorado Member

    Just because you can bake bread on the floor of your Jeep in the summer doesn't mean you won't need a heater come winter.
     
  15. Jeezum-Crow

    Jeezum-Crow New Member

    Murphys Law; What can go wrong, will go wrong. That little bugger follows me everywhere.:rofl:
     
  16. MOP

    MOP Active Member

    It took me 3 hours to change a battery in my cousins 1999 Neon yesterday.... terminals had rounded nuts, hold-down clamp was completely corroded and rusted on (and eventually busted), parts store gave me the wrong battery, TWICE......and it was 100+ outside at the time.......talk about Murphy's law.

    I can change the battery in my JEEP and our two other vehicles in 10 minutes or less.
     
  17. kaiser_willys

    kaiser_willys Well-Known Member

    you buy 3 jeeps to build one,and realize you still dont have enough parts:rofl: and my favorite,yeh we can have this one up and going in no time
     
  18. Patrick

    Patrick Super Moderator Staff Member

    I put headers on my JEEP to convert to power Saginaw................... 5 Years ago......
     
  19. mb82

    mb82 I feel great!

    Don't trust other people when they tell you... oh thats an easy fix. Because they never are.



    Don't trust people who drive TJs, they think they know about early Jeeps and they usually don't.
     
  20. jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    R) I've found that free sometimes is not the steal you thought it was, either. R)