1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Straightforward tire question. Need a straightforward answer.

Discussion in 'Early CJ5 and CJ6 Tech' started by Uncle Vin, Sep 29, 2008.

  1. Uncle Vin

    Uncle Vin Member 2022 Sponsor

    Will 7.50 x 16 NDTs mounted on a stock 16" Willys Truck rim fit a bone stock 63' CJ-5 without rubbing, etc.? The truck is a 20K mile bone stock CJ-5. No mods. Please post pics if you have them.
     
  2. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Yes and no.
    I allways had the rear rub at full flex.
     
  3. Steelwheels

    Steelwheels New Member

    Yeah, I'd like to see pics too. I'm thinking that would be a good look for my stock '65 although my rims are the orig. 15" size.
     
  4. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Don't they all rub the rear inner fender? I know that mine all did/do.
     
  5. SIDSCJ

    SIDSCJ Jeep addict

    I had 6.50-16 Grip Spur's on stock CJ-5 rims, fronts would rub on the springs at full lock. Too many leaves in the rear to flex, much less rub. I would check backspacing on the truck rims to see how they compare to the stock CJ wheel, may not be any difference. Grip Spurs have a really big outer lug, more pronounced than a NDT so you might get away with it. HTH
     
  6. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

  7. Don X

    Don X The Prodigal Moderator Staff Member 2023 Sponsor

    Billy, is that a picture of Animal before you tamed it?
     
  8. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Yea
    I should have left it that way:(
     
  9. Don X

    Don X The Prodigal Moderator Staff Member 2023 Sponsor

    Why??? :?