master cyl replacement

posted on the other site but quess THIS is the place to be. anybody have a part # for a dual res . master cyl ,mine is frame mounted and '68ish with 11" brakes . napa wants $69/auto zone $21 /and herm $$$,must have quoted me wrong ....picked this one up. a Fenco unit #M1292 but it does not have the grove for the rod to lock in. does it or can I put it together and it won't pull apart. can anybody help me ,,,,run coming up soon.

 

think i have the wagner # still. it's not cheap though (thinking around a bill), but it looks like the one on the left, minus the rust.

 

can you check it out for me ,please.

 

Can I have the old one if you don't want it, there getting hard to find. Shoot me a PM.

 

if this can be rebuilt ,I'll just keep it for myself where would I get a kit or a # for that .I can't even get a part # from anyone here.it's like a secret or something. I can't afford $180 from Herm . I don't see how that spring will work , if it was notched and you could pull the clip/washer and slip it over the rod that would work but it's not .the stock rod will fit in the hole just there is no way to hold it together but does it need to be ,can it be just loose in there??

 

I have a 71 cj 5 same problem remove snap ring & washer grind rod holder down to fit reinstall .
shim master cylinder away from frame so you can get the cap off

 

Good luck trying to get a reman they are like taking someone's right arm it took me about 3 months figure it out!!! talk to windyhill a few times about it

 

ok ,I'll just throw it in there not being held....... I figured they were hard to come by since windyhill wants it.will the cap retainer be a problem?

 

Correct me if I am wrong.
The one on the left (with the rust coat) is a frame mount?
The one on the right (sans rust) looks to be a firewall mount.
Is that right?

 

Hey, if you still need one I've got one off of a '70 or '71 Renegade in my shed. Looks just like your old one. Not sure if it works or not, but you're welcome to it.

 

I have no idea, this is what was sold to me after i told them make and yr. and Dummy I'll be over this weekend to grab it ..... mine stops but will slowly sink to the floor. yet another score from the Dummy free vault. thanks man !!!!

 

i dont believe either of those are frame mount. i went to napas web site and the one for a 68 was a single res. frame mount. unless i am missing something here. also went to jc whitney and they show a dual res. for my 66, i am so confused. i would love to have a bolt on frame mount dual res. for my 66 without using herms bracket. so whats the deal here.

 

the rusty one is off my frame. mines a 68ish I think ,that had 10" brakes. Masterofpuppets -I saw your previous post on MC's did not get anywhere either, I dont know what the deal is ,nobody has a part # other than Herm.?I don't have that $$$.I'll just drop it too, try Dummys or try the new one for $22 .

 

the new one does fit the frame mount you have to shim it away from the frame to take the cap off a thick lock washer or flat washer works been down that road

 

thank you ,I nominate Spuds K to member....... instead of jr.member .

 

glad to help thanks for the nomination got the master cylinder from napa too