1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

73 cj5 steering box question

Discussion in 'Intermediate CJ-5/6/7/8' started by Sander, Jun 15, 2011.

  1. Sander

    Sander New Member

    Hi,

    My dad and I are restoring a :AMC:73 cj5. Last saturday we found the steeringbox but we didn't find the brackets to mount the steering box to the chassis. The jeep was bought in pieces and thats why i dont know how the steeringbox brackets are bolted to the chassis.

    so my question is: Does someone has pictures how the steering box is bolted to the chassis (the jeep is completely stock):?

    thanks,

    Sander
     
  2. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    No picture on hand, but it bolts to the inside of the frame channel, under the front cross member. If you had the bracket, it would be obvious.

    BTW these 72-75 brackets are not plentiful. They sometimes break, and there is no aftermarket source.
     
  3. pathkiller

    pathkiller Member

  4. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Well done pathkiller.

    The bracket pictured in the link may or may not be for power steering. The part facing you goes in to the frame. The bolt surface for the steering gear is on the ground. For PS, there should be a place for four bolts. The manual steering bracket uses three bolts. Either bracket will work with either gear, but the four-bolt configuration is somewhat stronger, and therefore paired with PS. Just FYI.
     
  5. Sander

    Sander New Member

    ok thanks for the reply.
    Thats what i want to know
     
  6. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    would the later bracket fit an earlier frame?
     
  7. nickmil

    nickmil In mothballs.

    I belie e the bolt up is different and I know it angles the steering gear differently necessitating a different pitman arm
     
  8. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    thanks nick just got a donor rig 4 speed power steering and manual disks sorry for the hijack....
     
  9. hudsonhawk

    hudsonhawk Well-Known Member

    Sander, If you don't have the braket let me know. I may still hve the one I took off my 72. Its the 3 bolt bracket for the manual steering but I ran PS on it for 4 years doing some serious rock crawling without a problem.
     
  10. hudsonhawk

    hudsonhawk Well-Known Member

    On the later CJs the front frame horns were boxed. The stamped 2 piece brackets bolted to the top and bottom of the frame rail.
     
  11. Sander

    Sander New Member

    Thanks for the reply but I live in the Netherlands :p. My dad and I are going to a guy who parted his 73 cj5 out. He said he has some brackets and other stuff laying around, so hopefully the problem is solved :D