Ok never mind I guess using the origional part reversed works you guys say it does. I already bought the part that Advance adapters says works...
The advance adapters kit for the Saginaw steering swap uses the Commando type double end. I haven't put mine together yet but I did buy all the...
My local ACE here in Silverton,OR. Has gloss black on the shelf along with four five other colors the desk I'm sitting at is done in spray emerald...
Isn't the angle wrong when you use the stock double end? I have one from a commando that had the saginaw type steering and it is angled oppisite...
The only thing I'll farm out is the Machine work on the engine and the install of the OD. Other then that I will do most everything myself.
I wasn't sure and thought it would be a good idea to mention it JUST in case. I wish someone had mentioned the problem I'm running into on my...
Steve have you jacked the rig up high enough for the left tire to hang on the spring. Of course it;s a photo os it's hard to tell but I was...
What is the stock bore of a 304? What is the stock bore of a 360? What is the stock stroke of a 304? What is the stock stroke of a 360?...
Actually most Jeeps weigh about 2500-2700lbs GVW stands for Gross Vehicle Weight that means the vehicle and all it can carry. Not what the...
Call Herm The overdrive guy at: 360-256-3843 http://www.hermtheoverdriveguy.com/id21.htm
The Clifford head if you still have stock steering (ross) is doable as to back pressure that isn't a concern. What will be a consern is if you can...
Use the largest bolts that will fit in the holes you have. If 3/8 fits use them if you can squeeze 7/16" bolts thru the holes use those. The...
I'm going to be building an aluminum manifold to mount a Holley Weber 5200 32/36 progressive two barrel. I'm also going to fab up tubular headers...
Just as an example here are a few samples of Toy haulers a couple say they can haul a Dune Buggy so hauling a jeep looks like a possiblity....
You might look into trading your camp trailer for what is called a toy hauler. It is a style of camp trailer with basically a garage in the back....
If his engine is stock it is a 134F not an L and the flywheel and starter gear teeth are different. Unless you can split the two starters and swap...
There is another advantage to using a never seize compound. It will help create a better seal around the threads. On our mustang I use this and...
Do you want to do this right or get by? Doing it right: Those brake shoes should be replaced they would be in any certified shop. And you need...
Chris be sure to carefully inspect the cable the full leght of it for bends or burrs. Be sure to waer heavy leather gloves while you do this....
You will have a very hard time finding a replacement as these were a serviced item not a replaced part like a modern PCV. They are made to come...
Separate names with a comma.