Is anyone out there running a sway bar under their Jeep? I've finally got the D30 under there, and I'm just wondering if I try to mount the sway...
I plan on sandwiching my fiberglass tub firewall, with sheet metal. Both to support the brake booster/dual master and swinging pedals. The...
Seeing as my axle gears aren't matched, yet. Is it better to run without the front drive shaft connected entirely or should I change the yoke and...
Has anyone done swinging pedals on a cj5 with a fiberglass tub? I've got the pedals and all the brackets along with the brake booster/dual MC...
Good morning, Question about bumpers. I purchased a nice piece of channel steel to replace my rusted out bumper but, since it was so rusted out...
I'm looking to remount my fiberglass tub to the frame on the stock 57 this weekend. When I removed it, I noticed that there was no rear body frame...
So, I couldn't find an axle tag on neither the front nor the rear axle. I tried counting the number of drive shaft rotations, in relation to...
Are Monroe shocks The original brand shocks that came on the 57 Cj5? Are these shocks just right for the Jeep or is it worth the extra money for...
I have a T90a on the stock 57 cj5. I've got the tub off to check the frame and make sure everything is on the up and up. Should I replace the...
So, I got the tub off the frame of the 57 CJ5. It's got the nice C channel frame and I'm going to be cleaning that up! By the way, getting the tub...
I talked to a guy who said he has a Dana 30 with 4.10 gears and disc brakes. Would this be an Ok swap for my original axle? I have. 57 cj5 stock...
Good morning, So, a few weeks ago, a family friend who has been big into Jeeps since he was born stopped by to check things out. Although...
This weekend, I removed the heater from the Jeep to start mapping out my new pedals...well, I had a buddy stop by and question everything that I...
So, I'm going to install the new fuel pump I just received on the Jeep. If I'm going through the trouble of replacing the tank and pump, I...
Need some input here. I have the access to a Dana44 out of a 72 Scout II. Would it be worth the effort of shortening it up and putting discs on...
So, I've been posting on here for a few months. Asking random questions and learning things along the way by reading posts and searching the...
Has anyone ever seen manual locking hubs like pictured below? My grandfather said a guy he worked with in the 70's fabbed these up. They won't...
Do all soft tops snap onto the body? On my fiberglass tub, there are the back side of the snaps every couple inches or so. I don't know if this...
I've been doing a lot of research on Bed liners for the Willys. Although I'd like to keep everything stock (rebuild with my grandfather, we like...
Gents, The fuel pump on the 56 cj5 has a bad diaphragm. Is it dumb to look for a rebuild kit or do I just need to sack up for the new replacement!?
Separate names with a comma.