Thanks guys. That should help me out a bunch. Kent
I searched and searched and can not find much at all...:roll: I am planning on building a bumper with recovery points and a reciever while...
Ha!! Well since the cats were nice enough to bring in a wood pecker downstairs..... They proceeded to chase the thing all over our bedroom.... I...
Well.... I am off to bed for a short nap. Feel free to leave a reply. I will not be back untill about 3pm central. Kent
Ok, so I just drove home in 1-2 inches of fresh snow. No problems at all. :) The weather guys say we have another 4-5 inches of the white stuff...
Well.....I am some what new to the 304 also. As you already know your mpg is way off the base line. I seem to get around 15-17 with my 304 using a...
"IF" you are running lean, yes it will produce more heat.
Got it. Thanks for the help. I have read a whole lot and really like Tim's info about frame flex adding to the suspension travel. Kent
As for the torque on the bolts, I snuged them down till the metal sleeve in the bushing contacted the shackles. But how about the travel? I saw...
OK, so I just replaced ALL my bushings. I did all the spring eye and shackle bushings with the "prothane" set. It was much overdue.:oops: I am...
Tim, On my 304 it goes to zero shortly after engine shut down, maybe a second or two. As for the rest you already know. Kent
OK, we are back on the trail again!! I had to make one stud for the back of the pump, interesting as that is METRIC....... One stud was on the...
Jim and Tim, thank you! That diagram answers all my questions. What I do from here I am not sure though..... Back to the parts store to start...
OK, here are a few shots of what I have going on. Looking at the pressure line I know it will not fit.... Should I try to bend it or just bring...
There are no studs, only threads for bolts on the back. I'll get a picture of it and post in the morning, I am off to work in a few minutes. Kent
I think that is it. I have a FSM but it is unclear as to how the PS pump mounts to the bracket. There were some home made brackets on there...
That helps to start with. :) Would you be kind enough to get a pic from directly behind the pump, or as close to behind it. I am trying to see...
Thanks!:)
OK, so I now have some oem brackets. Upon looking them over to install I notice my new PS pump will not fit the brackets.....:mad: I have the...
OK, this morning after a few days soaking with PB...... A little heat.....Lots of force..... The pulley came off!:) I now have some real...
Separate names with a comma.