I see Hermtheoverdriveguy has them. ill look into that!!
Where can I get a remote reservoir for the master cylinder on the frame to run it up the fire wall?? For 61 cj5 and 48 cj2a. The kit replaces...
The narrow track axles are under the jeep and it has been run with them. I am guessing they are that only by going on the front has drum brakes...
Have a dana 30 front and a amc 20 rear in a 61 cj5. Found some wide track axles that are the same model and front has disc brakes. How much...
Put a SM465 GM behind a 231 v-6 and used the stock GM bearing but the clutch does not disengage at all. Put a bolt in the clutch fork to pull it...
I'm more confused now!! Thanks for the info
Wonder if a jeep t-18 will bolt up to BOP bell housing? I know that the front output shaft has to be the shorter one from a cj and not from a...
Feels like a good detent. Maybe someone has modified it at one point. Thanks for the info fdpwr2a
I've got a D-20 that has an inline shift pattern and it has a two wheel drive low range. Has it been modified or did some of them have that from...
Yes the gm style alt. works good and fits right in. I converted mine to a one wire. fdpwr2a
I'm having the same issue using a 225 and a sm 420 I too will checkout a few things I hope I don't have to pull the motor I had just swapped in!!...
Thanks for all the info that clears alot up for me!! fdpwr2a
Yes I was aware of the different first gear ratios. I thought the synchronized first gear would be nice. I was also thinking of the t-18 or t-98...
So what is the best t-19 to get? Some of them I have found out is you can drill the back of the case to fit the plate to fit the D-20 on the...
If I find a t-19 transmission will it fit onto a BOP bell housing? I see that if I find one out of a scout it will have the wrong size input...
Picked up another jeep the other day 61 cj5 solid body, tank fiberglass top, amc 20 rear, dana 30 front and 231 buick v-6 grand national motor...
Putting a 225 in the 5 and found out one head is cracked. Luckly had a spare motor and pulled the heads from it and I think I will hopefully have...
Putting a 225 buick v-6 in was wondering clutch kit I need and from where? I don't have anything to wild I will just run 31 x 10.5 tires and a...
Thanks for the info. I am on the hunt for a bellhousing. If anyone has one let me know!! fdpwr2a
I understand that the bellhousing pattern is BOP. So what vehicles would have this? The cars with auto transmissions does not have a removable...
Separate names with a comma.