1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Throw Out Bearing

Discussion in 'Intermediate CJ-5/6/7/8' started by cj573, Jun 9, 2024 at 5:56 PM.

  1. Jun 9, 2024 at 5:56 PM
    cj573

    cj573 Member

    Pittsburgh
    Joined:
    Jan 27, 2017
    Messages:
    85
    I am installing a new clutch with a 11 inch disc and 3 finger pressure plate . I can not locate a throw out bearing. I have seen them that will fit a 10 inch. Will that work with a 11 inch pressure plate. Also what it a good brand
     
  2. Jun 9, 2024 at 6:57 PM
    Desert Runner

    Desert Runner Member 2024 Sponsor 2022 Sponsor

    Hickory, Pa
    Joined:
    Sep 11, 2005
    Messages:
    828
    Ok, 1st what year/make/model Jeep.
    On mine i was able To use the stock throw out bearing for T150 transmission. I'm running A T18, With an 11 inch clutch disk and a borg Warner threefinger pressure plate the stock throughout bearing matches nicely
     
    Dwins1 likes this.
  3. Jun 9, 2024 at 9:59 PM
    cj573

    cj573 Member

    Pittsburgh
    Joined:
    Jan 27, 2017
    Messages:
    85
    It is a cj5 73 with a 304 and a t15 transmission. The kit came with a throw out bearing, but it was broken and to small. So I wanted to get a new one
     
    Ol Fogie and Dwins1 like this.
New Posts