No I didnt get a rebuild kit for it, the gaskets and pumps were all in good condition so I was just cleaning the jets. When its running the...
Yeahh I did do that, but still cant find any information on the float levels or anything...
this carb doesnt look like the weber 34 dcoe at all....
I am having no luck with finding info on weber 34. I have tried weber's site, other 4wd sites, google. I cant find any diagrams, specs, settings,...
I had a Weber carb given to me to put on my '74 CJ5 with the 258, to get rid of the old bbd. The carb came on the intake of a jeep 258 intake, so...
Figured it out!! I moved the slave downward, I didnt see one of the holes lower, it was covered in grease. So now the slave is back in line with...
Yeahh!! thats what I was thinking too. I never gave it a thought before I put it on, but fuel line is designed for the high pressures.
Yeah I am using an adjustable one too. I am also using rubber fuel line.... could this be the problem? suppose the rubber is expanding instead of...
Update: When I have no slack at all on the slave linkage, (if anything, I have some pressure on it), the slave piston moves a very very little...
Okay, yeah I am just under bottoming out the master piston. I have bled it and bled it and bled it :-/ used almost 1/2 gallon of DOT 3
Yeah I have read the Novak site on the clutches. I have bled the system, multiple times. It is about 90 degrees, I had to do some fabrication to...
I got a slave and master cylinder for a 1980 cj5 with the 2.5 L engine in it, because many of the people that have put a hydro clutch on a mid...
If I got a new slave from a 1980 CJ5 with a 2.5L, Can I get just about any master? Should the bore size be the same, or does it matter?
Separate names with a comma.