Here are the pics using the original cover as a component of the fabricated cover. It's better than a hole in the floor.
I utilized the three speed cover plate as my starting reference when constructing my T-18 conversion cover. I’ll try to shrink the pics to fit.
Chill out. This the most respectful Jeep forum on the net with the most helpful and knowledgeable members out there. If you don’t want...
When I did the PS conversion on my 73 with the 258 everything came from a 73 commando donor. I waited about 6 years to get all the parts required...
I used the stock crossmember and skid plate. The crossmember moves back and uses additional holes that should be in your frame. The chalk lines...
Explain to mgt that getting the selectable the first time will save you $ in the long run. Ask me how I know. I have a used Spartan if you want...
Since I started this thread and it has been resurrected, thought I would give an update. Thanks to all the advice and proper planning the swap...
The Ford Raptor uses a tru-trac in the front differential. Prior to that use they weren’t recommended for tires over 33 I think by Eaton. Maybe...
Tru-trac in the front is amazing. I have an Eaton e-locker in the rear.
The kits for the D20 are hard to find. Herm the overdrive guy bought up the remaining inventory. I put one in my D20 about a year ago. My 73 is...
I ran those 35/15-15 superswampers 30 years ago in a scrambler with 4.10’s, T176, D300 and a swapped in 304, cam, 4bbl. It was ok street and...
Plumbers putty
BTW, $5.99 each on Rock Auto
IMHO once the ignition is upgraded with a MSD distributor, MSD 6A box and MSD blaster coil, the small investment in the iridium plugs makes the...
NGK 97382
Separate names with a comma.