The Kaiser supersonic L4-134 was used in the Kaiser Henry J car it was not a replacement engine . They were tuned fore higher horsepower for use...
The early V6 CJ's used a 17" wide radiator the later V6 CJ's and commando's used a 22" wide radiator as you found out . Bill
except for very early f heads they all came with hardened exhaust seat inserts . That crack can be repaired by pinning ( what is done is you...
Jeep say's that the redline for the "L" and "F" heads is 4000 rpm. Yes the later "F" head oil pumps are higher volume which will allow you to run...
stock compression ratio 6.48 to 1 ran at stock timing (5 degrees BTDC) with stock ignition . With a forged crank and rods and the bearing sizes...
Spend half my life grinding those nuts smooth again so I can use the socket again . Bill
If you would like to do it with all jeep parts .Use exhaust manifolds off a 69-71 commando and the steering box mount from the same . If you...
No pictures sorry . Made our own exhaust manifold out of .120 wall stainless tubing and fabricated a custom intake also .Used a 938SD YF...
Installed a 2.2 chrysler turbo on a L Head a few years ago ran like it was a V6 . Had no problems even with 15 psi boost .Bill
Separate names with a comma.