Thanks Nickmil, that is exactly the info I was looking for.
I just purchased a new (to me) set of diffs. As a result, I will need to switch my dana 18 to a dana 20. My question is, do I need an adapter kit...
I went through a similar seach recently, here's the link to the previous discussion:...
I think that is pretty fair considering the location and that they come as a pair.
PM sent. Can you post this on the global user library on SolidWorks?
Cool! I have SolidWorks 2005, is it an assembly or a solid part? Either way, I would love to have a copy.
I'd stick with 31x10.5, wider and you will likely hit the frame on tight turns. I like the look of the MTR's.
What program are you using? If you don't mind sending me a copy of your model I could definately use it and would really appreciate it. George
I would look at the extent of the rust before I used POR, simply because this is a structural safety support. If the rust/pitting is too deep,...
http://www.willysjeepparts.com/Spring_Attaching_Parts.htm as a stock replacement.
http://www.willysjeepparts.com/Spring_Attaching_Parts.htm ...all the way at the bottom.
I sandblasted then used a Marhyde self-etching primer followed by a rustoleum coat in flat black. The self-etching primer is probably not...
I had a similar problem with my 1.5" YJ superlift springs. I don't know if it was the springs or flex in the body, as I didn't notice it right...
There is a really good list of venders in this months JP magazine.
Separate names with a comma.
