1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Keys5a's Recent Activity

  1. Keys5a liked dnb71R2's post in the thread M38.

    Have a few photos of CJ3As in your back pocket, just in case they want to assign a model to the title.

    Jul 8, 2025 at 12:40 PM
  2. Keys5a replied to the thread Dana 44 Skid Plate.

    If your ‘71 is sitting on axles and tires, and better yet have a body tub and engine/transmission, climb onboard (rear drawbar is...

    Jul 7, 2025 at 2:43 PM
  3. Keys5a replied to the thread Dana 44 Skid Plate.

    And maybe pull a couple leafs out of the pack. Those springs likely have little to no flex. -Donny

    Jul 6, 2025 at 4:22 PM
  4. Keys5a liked jeepdaddy2000's post in the thread Dana 44 Skid Plate.

    Careful, chrome on a CJ has been proven to degrade the ignition and induction systems, sometimes to the point that the only place they...

    Jul 6, 2025 at 4:16 PM
  5. Keys5a liked timgr's post in the thread Roch 2G Carb W/stuck ball..

    New member - first post. Welcome from Boston. The original poster (OP, Walt) has been deceased since October of last year. If you read...

    Jul 6, 2025 at 4:15 PM
  6. Keys5a liked Travis Hodges's post in the thread Roch 2G Carb W/stuck ball..

    I know this was an old post but how did you seal up the carburetor after drilling the hole in it? I have the exact same problem of...

    Jul 6, 2025 at 4:14 PM
  7. Keys5a replied to the thread Master Cylinder/booster Matching.

    Does it matter? As long as it all bolts together, it should work. Power brakes were an option, but not required. I would run it if I...

    Jul 6, 2025 at 4:11 PM
New Posts